TREATMENT PLANT ON THE BASIS OF CAPILLARY MEMBRANES
Purpose of the development:
Fine purification of colloidal contaminants and microorganisms in the boiler water systems, boilers, requiring deep cleaning water from the particulate size of 0.05 microns.
Recommended application field:
Water treatment system.
Technical characteristic:
Material: Polysulfone
The working surface of membrane, m: 22.5 (3.5)
The nominal molecular mass limit kDa: 300
Overall dimensions of the element, mm, diameter, height: 75-1100 (1600)
Operating pressure, MPa, max.: The concentrate circuit: 0.5 filtratny circuit: 0.2
Productivity on the water, l / h, min.: 400 (600)
The service life of membrane elements, months: more than 6
Regeneration mode: membranobratnaya washing
Advantages over analogues:
The installation does not use a pump unit. Water filtration is carried out in deadlock mode due to the pressure difference between the concentrate and filtratnym outlines the installation. The use of ultrafiltration membranes with polysulfone high permeability ensures a high specific capacity of the unit for a long time.
Regeneration of the membrane element by reagentless methods - through periodic backwashing with hydropneumatic tank.
Compared with traditional methods of water treatment, is provided almost absolute degree of purification of water from the colloidal contaminants and microorganisms.
The development stage readiness:
Introduced in production
Description of the development:
() Installation is based on the hollow fiber membrane elements and hydropneumatic tank.
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Technological document's sale Creation of joint enterprise Realization of finished commodity
Photo
Country
Belarus
For additional information turn to: E-mail: gal@uintei.kiev.ua
|