Purpose of the development: Designed for mechanized cutting and loading of the rock mass.

Recommended application field: Scope - mining and mining.

Technical characteristic: TECHNICAL SPECIFICATIONS: - Technical cutting performance - 0.3 - 1.8 cubic meters. / Min - Boom swing - not less than: width - 7000 mm height (from soil level) - 5000 mm below ground level - 200 mm - Speed ??- not less than: Working -1.0 m / min shunting (without loading) -5.0 m / min - The size of the harvester in the transport position: the width of the tracks - 2610 mm Runner width - 3700 mm the height of the housing combine - 2000 mm length - 10500 (13200) mm - Weight of the combine - not more than 45 tonnes - Nominal motor power of the executive body - 110 kW - The total rated power of electric motors (without loader - no more than 210 kW - Rated mains supply: Voltage - 660 frequency - 50Hz (In parentheses are the parameters for the version with a scraper conveyor with lifting and turning the console handling).

Advantages over analogues: Benefits - Management combine done remotely wearable remote.

The development stage readiness: Introduced in production

Description of the development:
()
Combine PCB - 33 used in the horizontal and inclined up to +/- 12 degrees. generating cross-section of 10 square meters. Clear up 33 square meters. in the sinking of coal and a mixed slaughter with a tensile strength of destructible rocks up to 100 MPa (f = 8) and the abrasiveness to 15 mg in the mines, hazardous gas (methane) and coal dust. The content of the rocks with a yield strength of 100 MPa uniaxial compression should not exceed 30% of the total slaughter at prisechke rocks no more than 85%.

corresponds technical description
Conforms to technical characteristic

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua