RADAR CONTROL OF METALLURGICAL PROCESSES
Purpose of the development:
The radar control provides:
- Non-contact level measurement and profile of the material in process vessels, even at high temperatures, the presence of dust and corrosive gases;
- The accuracy, performance, and reliability that are necessary for automatic process control.
Recommended application field:
metallurgy
Technical characteristic:
Specifications radar RDU-X2:
The range of measured distances, m, - 1-20
Measurement error in the temperature range, ° C - 30 ... 50
Power supply - 24 V, 1.5 A
The radiation power, 20 mW (safe for staff)
Original signals:
- Analog, DC, mA 0 ... 5, 0/4-20
- Digital interface Rs-485
Degree of protection IP 56
The development stage readiness:
Ready for application
Description of the development:
() Radar antenna emits radio waves using an 8 mm long narrow surface to the controlled beam. Reflected from the surface of the material receives radio waves, the same antenna. To determine the distance to the surface of the materials used frequency method.
When using radar too dusty environments with high humidity and high blood pressure to an antenna mounted skid plates of radio transparent material. If the ambient temperature is high, the radar is installed in the secondary body, which is cooled by water or gas
Information processing in the industrial process control home computers provided by the radar, you can:
- To represent the full form of the surface of the fill of the technology monitor;
to administer the loading furnace;
- To maintain the preset profile grist;
- To prevent circumferential unevenness of the grist.
Radar mounted above the opening gas cooler, measures the distance to the surface of the foam bath and processing of this information allows the operator the possibility of signal emission fusion products. Statement by the corrective actions to prevent dropping of the fusion products from the converter.
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Technological document's sale Combinated reduction to industrial level Realization of finished commodity Joint production, sale, exploitation
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|