Purpose of the development: The use of air as the plasma environment in the plasma is widely known technology. In some cases, it makes sense to abandon the unique properties of water and return to a more familiar working medium - air? The answer is quite simple - the application of high-speed air plasma cutting machine for large thicknesses of the metal when the specialization of devices allows them to pick the best performance for this particular type of plasma treatment. That such developments are our air-plasma devices Multiplaz Multiplaz 7500 and 15000.

Recommended application field: Apparatus air plasma cutting "Multiplaz-7500" and "Multiplaz-15000" find their proper use in a variety of industries, specializing in cutting or cutting of metal from the rough scrapping - to precise sheet cutting. Select the type of device - for you. It is sufficient to estimate the average and maximum thickness of the material that you have to cut.

Technical characteristic: The input voltage, V - 380 V ± 10%; Frequency, Hz - 50-60 Input power, KVA - 7,5; Str. The open circuit voltage, V - 280 Welding current, A - 20 - 55; 20-100 Rated output voltage, V - 120, 130 The load factor,% - 100 Efficiency,% - 85 The loss factor, cos - 0.93 Class B Degree of protection IP21 Starting Method arc - Proximity Supply pressure compressor (compressor not included), bar - 5.5, 7 Compressed air consumption l / min - 250 and 480 Dimensions of power supply (L x W x H) mm - 560 x 210 x 370; ??570h380h370 Weight power source kg - 21: 33 Weight Burner with cable-hose kg - 5 Length of cable-hose, m - 9 The thickness of the cut steel sheet mm - up to 25, up to 50

Advantages over analogues: Air plasma cutters provide excellent cutting quality, its minimum width in comparison to gas cutting. By choosing the optimal modes, you will forget the look of burrs, beads and beading, typical for gas cutting. You can go from cutting stainless steel to black metal, and then to the copper, changing only the current mode of the device - simply turning the knob. And forget about the filler powders for cutting complex alloys - you do not use! Your workpiece will not warp during cutting, and you will not have to heat the metal to start the cut. The transformation of consumable components in small-sized elements (nozzles and cathodes), which are free month's supply fits in your pocket - is sure to impress. Moreover, the cost of consumable materials for air plasma cutting based on the cutting meter including power and compressed air is 1.5 - 2 times less than the cutting gas.

The development stage readiness: Ready for application

Description of the development:
()
Unlike welding which are essential properties of the protective antioxidant plasma-forming medium, for cutting the presence in plasma of large amounts of oxidizer, which is the oxygen in the air, is a positive factor. Higher than the water temperature plasma arc cutting is provided in our air-plasma devices, including the choice of a high power rating - 7.5 kW - 15 kW, respectively. The main thing - a significant increase in cutting speed, which can not be achieved by any other method of cutting. This is what you can achieve in your factory maximum productivity. For example, the cutting speed is 10 mm carbon steel with a gas torch, is about 0.4 m / min. When going on air - plasma cutting you can increase this speed at times - up to 0.8 - 1.2 m / min. During the same time, the same salary, cutter equipped with air-plasma device will be able to produce the volume of work is several times larger than its counterpart with a cutting torch. In addition, the important factor is the lack of need for personnel certification.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua