INDICATORS SEMICONDUCTOR PROBE-1
Purpose of the development:
Signaling PROBE-1 are the means of measurement and are designed to control single trace of toxic and flammable gases, vapors, and their combination in the air of industrial premises and outdoor facilities, determining the presence of leakage of natural gas (methane) or hydrocarbon gases (propane, butane and ammonia) and the issuance of alarm on exceeding this value.
Recommended application field:
Detectors can be applied in any industry and utilities, where there is a risk of leakage and accumulation of toxic gases and vapors, such as
- In sewage wells, pits, tunnels, sewers utilities;
- To empty the tank;
- In the boiler as a leak detector;
- From pipelines (for leak testing equipment);
- To check the tanks, vessels and facilities to determine their explosion in front of them, or at work;
- Leaks in the gas valves for industrial and domestic purposes, in the process equipment.
Technical characteristic:
Characteristic
Warm-up time alarms, with not more than 40
The time of issuing the alarm, with no more than:
- Signalling PROBE-1-37 40
- Less than 30 other performances
Time operation of the indicator to discharge
power supply (without changing and recharging) for
Intermittent operation, hours, at least 8
Sound pressure level at the signal issue
sounder axis at 1 meter, dB,
at least 60
Power supply from the built-in
battery pack, in the range of 2.3 to 2.8
Current consumption of signaling device, mA, more than 215
Overall dimensions, mm, not more 45x185x35
Weight, kg, not more than 0.26
Mean time to failure with the
maintenance hours, not less than 50 000
Total average service life, years, at least 10
Also available alarm PROBE-1 with remote block sensitive elements (SE)
the cord length of 1.6 m (6 m).
Advantages over analogues:
- Explosion-proof.
- Convection flow controlled environment.
- The function of leak detector, the presence of an audio signal, which varies depending on the level of gas concentration, and high sensitivity to detect and isolate the location of the gas leak.
- Light and sound alarm on low power.
- Fast warm, quick response.
- The instrument with remote sensor for detecting gas leaks in tight spaces.
- Easy management, facilitating operation of the device.
- Minimal maintenance.
- Small (fits in the palm).
The development stage readiness:
Introduced in production
Description of the development:
() Operation:
- Ambient and controlled environment, degree. C from -20 to +40
- Relative humidity of 30% to 80
- Atmospheric pressure, mm Hg 630 to 800
Modification of signaling PROBE-1
PROBE-1 signaling are modified depending on the version-controlled components and completeness.
Performance are controlled by the switch Nominal signal
PROBE-1 concentration, mg/m3
PROBE-1-27 Carbon Monoxide 20
(Carbon monoxide, CO)
PROBE-1-37 Hydrogen sulphide (H2S) 10
PROBE-1-47, Methane (CH4) 300
PROBE-1-57 Methane (CH4) 300
Carbon monoxide (carbon monoxide,
zag carbon monoxide CO) 50
Hydrogen sulfide (H2S) 5
PROBE-1-67 Propane (C3H8) 300
PROBE-1-77 ammonia (NH2) 100
Optionally the manufacturer is working on expanding the application of sensors PROBE-1 for the control of other substances.
By the number of monitored components PROBE-1-57 is set to Signaling components, other versions - single components. In the presence of air, the amount of flammable and toxic gas detector single component can only be used as an indicator of the total gas content and leakage of flammable and toxic gases and vapors.
Signaling continuous PROBE-1 have one fixed threshold.
Note: Alarm solid performance PROBE-1-77 is available with the metrological certification.
Possibility of transfer abroad:
Licence's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|