UNIT TRANSMISSION VALVE CBSA-2
Purpose of the development:
Signaling device valve CBSA-2 is designed to transmit and receive signals of alarm systems pulsed solenoid valve for its operation (closing) for gas contamination, fire, break-in.
Recommended application field:
Signaling device valve CBSA-2 is designed to transmit and receive signals of alarm systems pulsed solenoid valve for its operation (closing) for gas contamination, fire, break-in.
Technical characteristic:
characteristic
Power consumption, not more than 5
Overall dimensions, mm, no more than 155 x 140 x 65
Weight, kg, not more than 1.0
MTBF, hours, at least 30,000
Total average service life, years, at least 15
Power sensors are:
- Basic - AC 220 V,
frequency (50 ± 1) Hz;
- Back - from the external DC voltage (12,0 ± 1,2) B
The development stage readiness:
Introduced in production
Description of the development:
() CBSA-2 provides delivery of LED "Alarm" and the pulse signal to close the valve when closing and opening of the relay contacts.
By CBSA-2 can be connected gas detectors, burglar and fire alarm of any type, with the output normally closed or normally open relay contacts.
CBSA-2 is an ordinary performance and intended to be installed outside the hazardous area.
CBSA-2 provides delivery of LED "Alarm" and the pulse signal to close the valve when alarm is triggered it is connected to alarm systems. Number of gas detectors, connected in parallel to the input CBSA-2 - 50.
Operation:
ambient and controlled temperature from 1 to + 40 ° C;
relative humidity 80% at 25 ° C;
Atmospheric pressure, kPa (mm Hg) from 84 to 106.7 (630 to 800)
Possibility of transfer abroad:
Licence's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|