Purpose of the development: Gas detectors SG-1-1, SG-1-2, SG-1-3 for automatic continuous monitoring to explosive concentrations of gas GOST 5542-87 and (or) the volume fraction of the carbon monoxide, issuing audible and visual alarm, and delivery of electrical signals to external devices and switching electric circuits in excess of the established values ??of the volume fraction of methane and (or) of carbon monoxide in the air.

Recommended application field: For use in combustion and boiler various capacities, as well as in industrial, public and administrative buildings and facilities, municipal and residential, non hazardous areas on PUE. Signaling SG-1-1, SG-1-2, SG-1-3 are characterized by two remote sensors and two thresholds for each channel.

Technical characteristic: Power consumption AC 220V, W, not more than 7.5 The current consumed by an external source backup power, not more than 0.25 Overall dimensions, mm, not more than: - Sensor DTH-165 85h85h90 - Sensor ECT-15 85h115h90 - Blocks of BPS-170-1 ... 170-3 115h140h65 Communication distance "sensor-block", m, not more than 200 Time operation of the indicator without control and adjustment year, at least 1 MTBF, hours, not less than 50,000

Advantages over analogues: Power consumption AC 220V, W, not more than 7.5 The current consumed by an external source backup power, not more than 0.25 Overall dimensions, mm, not more than: - Sensor DTH-165 85x85x90 - Sensor ECT-15 85x115x90 - Blocks of BPS-170-1 ... 170-3 115x140x65 Communication distance "sensor-block", m, not more than 200 Time operation of the indicator without control and adjustment year, at least one MTBF, hours, not less than 50,000

The development stage readiness: Introduced in production

Description of the development:
()
Two-channel gas alarm SG-1-1, SG-1-2, SG-1-3 are stationary devices consisting of transducers (sensors thermochemical DTH-165 (CH4) and (or) of the ECT-15 (CO) and block power and signal (BPS). These devices under alarm about gassed provide for each channel switching electric circuits of AC and DC current, and sound an alarm to trigger the solenoid valve. Detectors contain a nominal DC supply voltage of 12V for control (via relay contacts operating in pulse mode) electromagnetic pulse valve

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua