Purpose of the development: - For water treatment in recirculation systems washing lines of cars and vehicles. - To clean the oily wastewater contaminated with oil products up to 300 mg / l. - To clean the polluted waters of other chemicals.

Recommended application field: It is used for treatment or recycling of waste water from car washes, agricultural machinery, waste water from the production plants, landfills, scrap, car parks; To improve the quality of treated wastewater to specific locations, such as water in the reserves, or wastewater discharge into a watercourse for water supply; When the cyclization process in water treatment sector, in the papermaking industry, in cooling systems or test links with high pressure; In water treatment plants to recycle water used for recreation, camps, at a construction site in remote areas, etc.

Technical characteristic: Type: Rebecca 01 Rebecca 02 Rebecca 03 Weight: 80, 160, 220 Dimensions (WxDxH), m: 0,60 x1, 00h1, 80, 0.78 x1, 25h1, 97, 0,95 x1, 45h1, 97 Optimal performance, m3: 0.75, 1.5, 2.5 , KW: 0.44, 0.74, 0.74.

Advantages over analogues: Advantages block chemical wastewater treatment in comparison with the biological treatment: 1. On the principle of chemical waste water treatment is not affected by any external factors, water temperature, salt content, concentration of cleaning agents, etc. 2. In the case of Microbiology no permanent control of the presence of microbial strains. 3. In a biological setting SALT impossible to regulate the pH of water production. 4. Efficiency (especially instant) removing oil from the dissolved substances in the chemical BOSV several times higher. 5. Biological UOSV react to any changes with significant delay and inefficiency. 6. After each treatment sedimentary tanks must be restored and complement biology. 7. Biology is unstable when disconnecting the washing line - require activation UOSV. Biological process of removing oil handy in case of a shutdown at specified conditions (environment, time). Conversely, chemical reactor BOSV satisfies continuous process wastewater from oil products. The big advantage is the chemical processes, other than cleaning water from oil, the high efficiency removal of insolubles.

The development stage readiness: Ready for application

Description of the development:
()
Rebeca is the main component of universal modular system of wastewater treatment technology (mostly from car washes), based on the principle of chemical coagulation, flocculation, and with their subsequent separation, which is composed of mud settling pit, sedimentation tank, a spare receiver, pressure setting and sorption filter. Depurator Rebeca made of stainless steel DIN 1.4404 and equipped with a control system that provides automatic operation with the ability to adjust the pH and conductivity of the water at the entrance. Parameters of raw and treated water at the inlet and outlet depends on the type of waste water and the degree of contamination. In the case of oil contamination, the maximum concentration of oil oil inlet should not exceed 300 mg / l. Water should not contain a large number of saponatov or solvents. From water to remove heavy particles suspended solids (sand). In compliance with these values ??and principles guaranteed by the following parameters on the output: oil - 1 mg / l (sorption filter 0.1-0.2 mg / l), undissolved substances - 5 mg / l.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Czech Republic

For additional information turn to:
E-mail: gal@uintei.kiev.ua