Declared technologies base

TRANSFER OF INNOVATIONAL TECHNOLOGIES

SOLID FUEL BOILER RETRO-3M


Purpose of the development: The boiler is fit for burning any kind of raw material: coal, peat briquette, sawdust, wood in pieces, brush, dry manure, straw, waste paper, etc. Best use of mixtures of high energy fuels (coal, peat bricks) with a low-calorie (sawdust, firewood, manure, straw).

Recommended application field: The boiler is used for central heating of industrial premises, wood dryers, private housing, especially for wood and small businesses, farms, halls, schools, shops, etc.

Technical characteristic: - Capacity from 22 to 1000 kW - The temperature of the hot water: Tmax = 95 ° C - Working pressure: P = 0.2-0.3 MPa, - Efficiency, depending on the type of fuel, to 93%.

Advantages over analogues: The most significant feature is a set of boilers 3 components: efficiency, economy and ecology. - Effectiveness is determined by a high level of heat transfer coefficient of the polehnogo up to 93% (depending on the fuel) due uniealnymi design features. Fuel can be laid once a day to pick up the ashes of the device, even during operation. - Efficiency is achieved through the use of much cheaper solid fuels, including waste wood, dry plants and even garbage. Operation of the boiler, which is guaranteed by the monitors and compliance simple rules of operation in a short time will ensure sustainability and to help save significant money in the future. - Green is to prevent and actually prohibit release of harmful substances into the atmosphere and burning (disposal) of various types of waste, garbage, etc. Does not require smoke exhausts and other complex instruments.

The development stage readiness: Introduced in production

Description of the development:
()
Boiler "retro-3M" is structurally made of sheet steel with a highly developed surface receiving heat. The boiler has a three-chamber structure. The first chamber (furnace) has a large amount of which will extend the single burning fuel filling, do not need constant maintenance after kindling the boiler. The second and third chambers function as heat recovery from combustion products and have a large heat exchange surface. Equipped with a mechanical agitator gridiron. To intensify the process of burning fuel, if necessary, the installation of the fan podduvaniya air. The boiler body is insulated. The unique characteristics of the boiler: - The ability to create "air cocoon" in the combustion chamber due to regulation of air flow, which allows to achieve maximum heat transfer and combustion process much further; - The possibility of combining pyrolysis method and ramjet combustion; - The possibility of cleaning the grate in the combustion process, without stopping the operation of the boiler; - Dissecting the system air flow from the bottom and the ability to cleanse the air dividers; - The ability to purify air nozzles and air channels in their pollution (removable air channels); - The possibility of settlement areas oxidant (air) in any area of ??the fire, depending on the type of fuel, preventing removal of the flue gas, the achievement of the outlet temperature 70 deg. With the temperature in the system carrier 50-70 deg. C.

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua

or fill out the form:
Organization name :
Address :
Settlement account :
Bank :
MFO :
OKPO code :

Scientific organization tutor's data :
Surname :
Name :
Patronymic :
Scientific degree :
Phone :
Fax :
E-mail :
Cooperation proposals (joint patent, joint enterprise, assembly sale and so on :
country: