COATING THICKNESS GAUGE TA-44M
Purpose of the development:
Designed to measure: the thickness of paints and coatings on non-magnetic elektrovodyaschih steel, and the thickness of bituminous thick coatings for steel.
Technical characteristic:
Specifications:
- The range of the measured thickness 5mkm 5000mkm ... (F2)
(depending on the sensor type) 1-15 mm (F4);
- The measurement resolution: 0.001 mm (0.999 mm);
Sensor F2 0.01 mm (1.00 mm);
- The measurement resolution: 0.01 mm;
Sensor F4
- Power 2 AA batteries;
- Time elapsed before incl., Min. 2-3;
- Warm-up time after incl., Max, min. 0.5;
- Operating temperature range, ° C -5 ... +40;
- Overall dimensions 122x65x23;
- Mass of the electronic unit with a battery, kg 0.20.
Advantages over analogues:
The advantages of the device include: low price, great informative graphic display (128x64 pixels) with a bright white backlight simultaneous output of the necessary information on the indicator, the visibility of its presentation; intuitive tool that increases the productivity of the operator; simultaneous output current and the average results and the number of measurements, indicate the beginning and end of the measurement, display the connected sensor, control of low battery power, shut-device when idle, small size and weight, while working with one set of batteries - 45 ± 10 hours, battery charge level control, the degree of ingress protection IP54.
The development stage readiness:
Introduced in production
Description of the development:
() The device attached to the body with a sensor F2 or F4 (cable length 1000 mm) allows measurement: thickness of paint and electrically non-magnetic coatings on steels, and the thickness of bituminous thick coatings for steel. Coatings on steel (dielectric and conductive coatings on ferromagnetic metals and alloys): sensor F2: coating thickness - 0-5000mkm, measurement error - ± (3% +2 mm), the dimensions of the sensor, mm D18h38. Thick coatings on steel (dielectric coatings on steel): sensor F4: coating thickness - 1-15 mm, measurement error - ± (3% of 0.02 mm), the dimensions of the sensor, mm D25h45.
Possibility of transfer abroad:
Licence's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|