Purpose of the development: Designed for non-destructive quality control.

Technical characteristic: Specifications: - Operating frequencies from 0.4 to 15 MHz; - Control range (steel) 0.5 to 6000 mm; - Dipazon measurement equivalent area reflectors from 0.8 to 314.0 mm square.; - The dynamic gain range receiving channel 100 dB; - Absolute measurement error defects depth ± (0,02 +0,01 H) mm; by measuring the ratio amplitudes ± (0,02 +0,01 Nx) dB; - Relative error equivalent to the area of ??the defect ± 15%; - Continuous operation time on battery battery, at least 8 hours.; - The mass of flaw, not more than 0.75 kg; - Dimensions 188x107x78 mm.

The development stage readiness: Introduced in production

Description of the development:
()
Ultrasonic Flaw DPU-71 general purpose GOST 23049 is designed to control the production: the presence of defects, such as continuity and uniformity of materials, finished products, semi-finished and welded (soldered) connections) depth measurement and depth coordinates defects measurement ratio of the amplitudes of signals reflected from defects, measuring the equivalent size of the defect, measuring the thickness of the product; measurement of sound velocity. All functions of the thickness gauge with a sweep, measurement of equivalent size of the defect, two independent three-level gate automatic signaling defect (ASD), two measuring gates, gate control acoustic contact, strobe AGC can configure TCG; operation with DGS diagrams, high depth gauge (coordinates ) occurrence of the defect; mode "marking by multiple reflections", the ability to display the sweep type RF; averaging mode "A-scan", the ability to store setups testing results; mode "electronic magnifying glass", two modes of "Freeze", storing mode "peaks ", mode of construction and processing" B-scan ", automated calibration of probes, complete and simplified versions of the menu display light, the mode of communication with the PC, logging procedures using additional software

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua