Purpose of the development: Filling, sealing, impregnation and wrapping electrical and radio products, manufacturing of reinforced materials and products for constructional purposes, obtaining protective and decorative coatings.

Recommended application field: Chemical industry, mechanical engineering, electrical engineering, radio engineering, etc.

Technical characteristic: Uncured resin: Characteristics of UP-666-1, UP-666-2, DP-666-3, UP-666-4 Mass%: - Epoxy groups 17,2-20,1, 18,0-21,5, 18,4-23,4, 20,0-22,3 - Saponifiable chlorine 6.2, 10.3, 15.5, 2.0 - Inorganic chlorine (chloride ion) 0.0085, 0.0075, 0.0090 - - Volatile 1.3, 1.8, 2.5, 1.2 dynamic viscosity at 25 ° C, Pa with 16.0, 8.0, 5.0, 8.0 The cured resin (range: 10 ° C + ch/25 5ch/80 ° C Characteristics of UP-666 UP-1-666-2 PD-666-3 + NC-95 + NC-95 + NC-95; Gel time, h 3.0, 2.5, 4.0; Specific impact strength 18.5, 22.0, 18.0 Heat resistance according to Martens, ° C 57, 67, 73 Brinell, MPa 159.5, 161.4, 162.0 Failure stress, MPa at - Tensile 62.8, 56.7, 72.2 - Compression 112.2, 118.0, 126.0 - Bending 115.1, 117.3, 125.0 The specific volume electrical resistance, Ohm-m 24.0 27.4 24.0

The development stage readiness: Introduced in production

Description of the development:
()
Modification products of low and medium weight resins are liquids with a wide range of viscosity. Easily combined with other epoxy resins, hardeners cure all hot and cold curing, provide good wetting of pigments, high filling compositions and impregnating a high capacity. When cured resin composition can be obtained from the elastic to hard, with high physical-mechanical and dielectric properties, high resistance to cracking.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua