Purpose of the development: RLC-meter precision MHC1100 for automatic measurement of inductance L, capacitance C, resistance R, the dissipation factor tg (Q Qr) and the tangent of the angle of the shift tg (Q-Qc Ql), the mutual inductance M of objects measuring DC resistance Rdc, interest parameter deviations measurement objects from the set value with the presentation of the results of measurements in digital form. The device is intended to replace the outdated automatic bridge P 5083, provides a high metrological characteristics, with improved functionality.

Recommended application field: RLC-meter precision MHC1100 can be used to perform metrology work at the control of electric and radio products, research, measurements of non-electrical quantities using transmitters of any type.

Technical characteristic: Main technical characteristics: - Operating frequency: direct current, alternating current, from 0.5 Hz to 100,000; - Accuracy class (at the fundamental frequency of 1 kHz) 0.01 / 0,001; Calibration foreign model as 0.01 / 0.003; - Operating frequency setting resolution is better than 5 • 10 [-5]; - Set-error rate of less than 2 • 10 [-5]; - Range of AC voltage on-site measurements (depending on the values measured value) in 0.01 to 4; - Discrete digital encoder (on the junior measuring range): by R, W better than 1 • 10 [-5]; by G, F better than 1 • 10 [-17]; by L, H better than 1 • 10 [-10]; by M, H better than 1 • 10 [-8]; - Error of measurement of resistance DC is not more than 0.01%; - Accuracy of measurement of mutual inductance at the fundamental frequency of 1 kHz up to 0.1%; - The measurement at 1 kHz, no more than 3 seconds; - Overall dimensions 300h290h120; - Weight, kg, not more than 5; - The working conditions of use: ambient temperature, ° C from 10 to 35; ambient humidity to 80% (25 ° C); mains voltage, 220 ± 22; Frequency, Hz 50 ± 1; Power consumption, not more, W 10.

The development stage readiness: Introduced in production

Description of the development:
()
RLC-meter provides: - The ability to automatically select the range and nature of the object of measurement; - Four-pair connection analyzing processes of measurement; - Parameter measurement with adjustable measurement signal; - The ability to manually select and fix the measuring range; - Measurement of parameters adjustable bias voltage applied to the measurement object; - Automatic calibration of a wide range of frequencies in order to reduce the frequency component of measurement error; - Calibration mode on external working standard of resistance, inductance capacitance; - The possibility of measurement and consideration of their initial values ??in series; - The possibility of measurement and consideration of their initial values ??in parallel; - The ability to measure parameters by averaging measurements from 2 to 99; - The possibility of rapid measurement parameters; - One-time and continuous measurement modes; - The ability to control the operation and display of measurement results using the built-in RLC-meter keyboard and display; - Ability to work with a PC via a serial interface RC232.

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua