ANALYZER OF DIGITAL SIGNALS LFM-5000
Purpose of the development:
Digital signal analyzer LFM-5000 is used to set the reception of digital terrestrial systems (air) television (DVB-T), digital cable (DVB-C) and digital satellite (DVB-S).
For signals with analog modulation allows to measure the signal strength of the images in the selective microvoltmeter in spectrum analyzer mode, measure signal strength in a selected frequency band, the signal / noise ratio. Allows you to build a histogram of a specified channel.
Recommended application field:
Telecommunications services and equipment - organizations, research, and services.
Technical characteristic:
Input / output connectors N (m), 50
VSWR, not more than 1.6
Supply voltage 200 ... 250 V
The power consumed by the network <= 20W
Time of battery life, at least 2 h
Battery charge time is not more than 12 hh
Warm-up time 5 min
Time to failure, at least 10,000 hh
Average service life of at least 5 year
Information display Monochrone LCD 10 cm (3,7 ") 320 (H) x 240 (V)
LED TV (to view the video) Colour, 4 "TFT, 480 (H) x 234 (V)
Dimensions 100x240x250 mm
Weight 3 kg
Advantages over analogues:
In addition, the meter allows you to:
- Save in non-volatile memory up to 50 bar graphs and spectrograms, with subsequent transfer to a computer via an RS-232;
- To form the power supply to the antenna preamplifier (DVB-T and DVB-C);
- To form voltage LNB: +13 / +18 V (400 mA), 22 kHz (DVB-S);
- Support instruction DiSEqC (layer specification 2.1)
The development stage readiness:
Introduced in production
Description of the development:
() For signals with digital modulation types METER allows:
- Measurement of the power level of the digital channel
- Measurement of the digital channel power ratio to the noise in the channel (SNR);
- Measurement of bit error rate to a Viterbi decoder (CBER);
- Measurement of BER after Viterbi (VBER);
- Measurement of the modulation error rate (MER);
- Building a constellation diagram;
- Measurement of the difference between successive PCR packets.
To control the quality of available TV channels METER can discover and browse channels with digital modulation types for built-in color TFT display (sound - the built-in speakers), the audio / video signals to external connectors, and use the built-in TFT display as a monitor, giving the external signals Audio / Video.
The measuring unit consists of a common core and a set of options (Signal Level Meter TV range, the spectrum analyzer satellite (950-2150 MHz) and MMDS (2380-2700 MHz) bands analyzer DVB-T, DVB-C analyzer, analyzer DVB-S), which on request can be completed METER
Possibility of transfer abroad:
Licence's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|