Purpose of the development: Designed for simultaneous monitoring of up to an explosive concentration of combustible gases (Ex), oxygen (O2), carbon monoxide (CO), carbon dioxide (CO2), methane (CH4), propane (C3H8), total hydrocarbons (? HF), hydrogen sulfide (H2S ), sulfur dioxide (SO2), nitrogen dioxide (NO2), in various combinations (one-, two-, three-, four-component) in the work area with simultaneous digital display of the measured components, and issuing warning (sound and light) alarm when exceeded concentrations measured components defined thresholds.

Recommended application field: Field of application of multi-gas analyzers ANKAT 7664M: service environment and labor protection companies associated with the release of toxic gases into the atmosphere, processing and transportation of oil and gas, heat and phone networks, oil, tanks, bilges and other areas where a lack of oxygen and the presence of flammable or toxic gases pose a threat to health or risk of explosion.

Technical characteristic: Characteristics Value Note Time alarm, 15 for Ex, O2 with no more than 30 for CO, H2S, SO2, NO2, CO2 Warm-up time, min, max 3 with optical channel measurement is not more than 5 minutes Ambient temperature, ° C -20 - +45 for mod. ANKAT-7664M, -01, -02, -30 - +45 For mod. ANKAT-7664M-03, -05, -06, -04, -11 -07, -08, -09, -10, -12, -13, -14 0 - +45 when working on the pump Standby time, hours, not less than 8 (6) for the mod. ANKAT-7664M, -01, -03, -04, -10 ... -14 (with incl. Pump) 16 (8) for the modes. ANKAT-7664M-02, -05, -06, -07, -08, -09 (With incl. Pump) Overall dimensions, mm, not more 110h210h80 Weight, kg, not more than 1.2 Service life, years, at least, 10 sensors for CO, H2S, SO2, NO2 three replacement commissioned O2 sensor, ? 2

Advantages over analogues: Ability to control up to four gases for modifications to the optical channel analyzer measurement time of 6 months without calibration installation of sensors on the connectors embedded micropump flameproof construction calculation of the average values ??for each measurement channel wide temperature range availability of light and sound alarm small size and weight Protection against dust and moisture

The development stage readiness: Introduced in production

Description of the development:
()
Type of analyzer - worn (individual). Sampling - or forced diffusion of embedded micropump. Method of measurement - electrochemical (O2, CO, H2S, SO2, NO2) and thermochemical (Ex), optical absorption (CO2? CH, CH4, C3H8). Gas analyzer provides simultaneous digital display of measured concentrations of all components of the built-in LCD display with backlight, as well as separate warning lights on each measurement component and a single audible alarm when the threshold is exceeded. Adjustment of the gas analyzer and set the phone by using the menu displayed on the alphanumeric display. The device is powered by the battery pack during the discharge of which the indicator displays a warning beep. The analyzer has a function for calculating the weighted average of 8 hours. When measuring the O2 "threshold 2" can be set as the excess, and in the fall (selected by user).

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Russia

For additional information turn to:
E-mail: gal@uintei.kiev.ua