IKVCH-VZ - PORTABLE TESTER EXPLOSION OF SUSPENDED PARTICULATES
Purpose of the development:
Designed to measure the optical density of the dust and gas environments, mass concentrations of particulate matter (dust) INC in calibration factor determined by a comparative method, as the ratio of the test instrument and meter scale mass concentrations, as well as to control dust deposits in order to predict the accumulation of explosive concentrations.
Recommended application field:
Field of application: Monitoring of particulate air pollution in the mines and mines, industrial facilities, foundries, welding and polishing workshops, and above-ground construction, cement plants, steel mills, brick kilns.
Technical characteristic:
Characteristics Value Note
Measuring range of the absolute value
optical density, B 0.0006 - 2 ml. category B and 0.0001 0.001 b -
switching. Sensitivity.
Measuring range of mass concentrations
dust, mg/m3 0.9 - 3000 ml. level 1 mg/m3 and 0.1 mg/m3 - at
switching. Sensitivity.
The limits of acceptable primary
relative error (d d) measurement
optical density,% d d = ± (0,02 +2,4? 10-5 * Dk - the larger of the limits of optical
density (Dk = 2,0), B
* (| Dk/D-1 |)) * 100% D - value Opt. raft. measured
medium B
Standard RS232 digital output
Warm-up time, min, max 10
Ambient temperature, ° C -30 - +40
Power, V: AA size batteries from 6.1 to 8.2 6 batteries
Continuous operation without
Adjustment of, not less than 8 hours
Standby time, up to 14 hours at a temperature of over 20 ° C
Overall dimensions: 285x95x156 weight, not more than 3.5 kg
Advantages over analogues:
automatic switching sensitivity with decreasing optical density to 0.04 B
high sensitivity (one significant digit digital display optical density - 0.0001 B, the mass concentration of dust - 0.1 mg/m3)
wide temperature range
increased time of continuous operation without recharging meter battery
keeping average mass concentration of dust at one-minute intervals in real time in the past 48 hours the meter
keeping average mass concentration of dust in the real-time set for the consumer measurement intervals
adjustment of sensitivity by controlling the supplied filter device
small size and weight
The development stage readiness:
Introduced in production
Description of the development:
() The principle of operation of the optical absorption, based on the method of determining the optical density of the dust-gas environment on the degree of attenuation of modulated electromagnetic radiation.
IKVCH meter-OT is monobloc portable optical device explosion-proof and has a marking of explosion "PO Exial / 0 ExiaIIAT4 X".
Measuring the degree of protection against access to hazardous parts, against ingress of solid foreign objects and water intrusion - IP54.
Scope of supply:
IKVCH meter-OT, SPTA (charger, control filter), technical documentation.
Possibility of transfer abroad:
Licence's sale Realization of finished commodity
Photo
Country
Russia
For additional information turn to: E-mail: gal@uintei.kiev.ua
|