Purpose of the development: ANKAT-310 gas analyzer is designed for periodic measurement of flue gas temperature during the adjustment work on optimizing combustion mode of fuels (gas, coal, fuel oil, etc.) in boilers of low and medium power (boilers, turbines, burners).

Recommended application field: Field of application: can be used utilities services, organizations conducting the repair and adjustment of boiler equipment, enterprise operating fuel combusting installation as well as environmental services and gas oversight.

Technical characteristic: Plot measured span, Limits of component in which the normalized basic absolute (relative) error of measurement error, Dd (dd) (Display range) CO 0-400 ppm 1 ± 20 ppm 1 400-8000 ppm 1 ± (20 0.1 (TSW-400)) m-1 (0 - 12000) O2 0 - 21% ob.doli (0 - 30) ± 0,2% vol. share NO 0-200 ppm 1 ± 20 ppm or 1 (± 10%) 200-2000 ppm 1 (0 - 4000) SO2 0-200 ppm 1 ± 20 ppm or 1 (± 10%) 200-3000 ppm 1 (0 - 5000) Pressure / vacuum -5 - 5 kPa kPa ± 0,1%

Advantages over analogues: analyzer in the hand or attached to a wall with a metal cover with magnetic insert time of 6 months without calibration store the measured data (up to 200 results), it may be transferred to a PC or printed with a thermal transfer installation of sensors on the connectors, easy replacement built-in booster flow wide temperature range Automatic control failure automatic shutdown of stimulus overload by measuring the concentration of the components of the gas mixture small size and weight Protection against dust and moisture.

The development stage readiness: Introduced in production

Description of the development:
()
Sampling - mandatory (integrated booster flow) Mode - periodic Principle - electrochemical. ANKAT-310 gas analyzer provides simultaneous digital display of values ??of all measured and calculated parameters of the built-in LCD display with backlight. Calibration and setup modes analyzer by using the menu displayed on the alphanumeric LCD display and is held every six months. Gas analyzer stores information about the measurements, with reference to real time. Gas Analyzer has the following key and plug blocks: analyzer (measuring unit, the electrochemical cell booster flow) Remote probozabornik thermocooler (optional) thermal infrared channel of communication with a gas analyzer (optional) Remote probozabornik designed to: - Sample collection - Dust filtration - Measuring the temperature of the analyzed medium Thermocooler IBYAL.418316.020 provides (required for modifications ANKAT-310-03, -06, for the rest is recommended): - Draining the gas mixture - Cooling the gas mixture Thermal printer allows you to print the measured data. Radius receiving the infrared channel to 2 m For the operation of the gas analyzer is supplied with PC software that allows you to: enter via the PC to the analyzer control list of places with reference to real-time processing, spreadsheet and graphics on a PC on the data read from the analyzer, view the data on the monitor.

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Russia

For additional information turn to:
E-mail: gal@uintei.kiev.ua