EXTRUDER GRANULATOR VACUUM
Purpose of the development:
It is intended for processing into pellets prepared by pre-TPM, including polyesters (PET, PBTF) and termonestabilnyh polymers (PVC), and recycled materials.
Recommended application field:
Chemical, plastics.
Technical characteristic:
Specifications - EGM
The performance of PET, kg / h - at least 200
Feed materials - any thermostable polymer
The residual pressure in the FAC, mm Hg - 10 - 50
Screw diameter in mm - 75
Screw length, mm - 30D
Range of temperature, ° C - 100 - 300
Range of pressure of the melt, Bar - 100 - 450
Regulation of the diameter of the granules, mm - 3, 5, 6
Installed power, kW ~ 80
Overall dimensions, mm - 11000 x 2650 x 4290
Weight, kg 4000
The development stage readiness:
Introduced in production
Description of the development:
() This versatile line of recycled thermoplastic polymeric materials (TPM).
Design features:
At the core of the line on the principle of vacuum drying, pre-prepared SST fragmented.
Vacuum drying chamber (FAC)-through, located on the degassing extruder, the output of the camera combined with a zone of food extruder. The camera has an external heating water circuit, which circulates coolant at a constant temperature, which prevents overheating of the SST. The mean residence time in the SST FAC is only 8-10 minutes at a residual pressure of 25 -50 mm Hg SST and the temperature to 90 ° C.
Degassing the cylinder has a classic pyatizonny degassing screw with barrier plasticizing zone, which increases its plasticizing ability, L / D = 30.
The extruder is equipped with a new original design of the filter that allows change to make the filter grids without stopping the equipment.
Granulation is performed in the extrusion head interchangeable nozzles for air or water scheme granulation method.
The complex is fully automated recycling and operated by one operator.
Options:
- The line is standard equipped with a thermostat to maintain constant temperature termonositelya capacity of 16 kW;
- Vacuum station, to create a vacuum and filtration station Extracted gases from the degassing zone of the extruder, 7.5 kW;
- Blowers to remove the pellet capacity of 1.5 kW;
- Automatic or manual control system.
Options
At the request of the customer's line can be equipped with food hopper capacity
6500 liters and a spiral conveyor loading hopper.
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Realization of finished commodity
Photo
Country
Russia
For additional information turn to: E-mail: gal@uintei.kiev.ua
|