Purpose of the development: It is used for making aerated concrete mixtures based on mineral binders, fillers, additives, foaming agent and water. Reduce heat loss through the exterior building envelope.

Recommended application field: Scope of foam is much broader many other building materials. By changing the ratio of the components, you can get different types of foam, used for: - Exterior walls; - Internal walls; - Thermoinlay; - Thermal insulation of roofs; - Thermal insulation of pipelines; - Sound and heat insulation of intermediate floors. The following types of foam: insulation - g/m3 density of 400-500, heat-insulating structural - the density of 600-900 kg/m3 structural - density 100-1200 kg/m3. The peculiarity of the technology is odnostadiynist preparation of concrete mix, where the processes of foam and mixing together. Striking structures (without any additives) is carried out in 20-25 hours (after a set of 25% of the strength of the projects), which allows you to save the park forms. Under the natural hardening foam after 7 days gaining 55-70% of the mark of strength. The resulting arrays are subjected to cutting foam concrete blocks on the required size. Installation start in 2-3 weeks exposure to air after their manufacture.

Technical characteristic: Characteristics of the resulting foam: The average density, kg/m3 ... ... ... ... 400-1000 Compressive strength, MPa, ... ... ... .1,5-4,0 Thermal conductivity, W / bridges ... ...... 0, 08-0,16 Frost resistance, cycles ... ... ... ... ... 35

Advantages over analogues: Key competitive advantages: Increased strength and reduced thermal conductivity of foam from a homogeneous structure Improving the effectiveness of technology is achieved through one-step preparation of foam concrete mix it with the simultaneous activation.

The development stage readiness: Introduced in production

Technical and economic effect: The economic effect of the introduction: at least 250 thousand UAH. per year, depending on the amount of implementation.

Description of the development:
()
The peculiarity of the technology is odnostadiynist preparation of concrete mix, where the processes of foam and mixing together. Striking structures (without any additives) is carried out in 20-25 hours (after a set of 25% of the strength of the projects), which allows you to save the park forms. Under the natural hardening foam after 7 days gaining 55-70% of the mark of strength. The resulting arrays are subjected to cutting foam concrete blocks on the required size. Installation start in 2-3 weeks exposure to air after their manufacture.

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua