Purpose of the development: Stationary batteries are a series of SN to complete the battery used as a source of DC power plants and substations, telephone and telegraph communication centers and other facilities.

Recommended application field: Designed to operate in conditions of M1 in the charging mode of constant charge and discharge, have been successfully used in the systems of power and communication.

Technical characteristic: CONSTRUCTION: * Electrodes: pasted grid plate of the lead-antimony alloy containing less than 2%. * Separation: a separator made ??of polymeric materials in combination with glass fiber, which activates the conductivity of the material, thus reducing the loss of functional capacity throughout life. * Body and cover: Made of impact resistant plastic, which provides ease of maintenance and mechanical stability throughout the lifetime. The two sides of the body element designated maximum and minimum levels of electrolyte. * Electrolyte: aqueous solution of sulfuric acid density of 1.240 ± 0.005 g/cm3 * Terminal: sealed in leak electrolyte pole with solid brass inserts - M12 * Ventilation tube: design plugs protects against splashing of the electrolyte, even at the time of charging with high voltage. Stoppers are used as an additional tool to prevent the ignition (to improve safety) and a catalytic recombination (to reduce water loss). * Jumpers: made ??of solid copper (30x3 mm). * Temperature range: +5 to +45 ° C (preferably +20 ° C). * Installation: All valid standard vertical mounting on isolated racks.

Advantages over analogues: The term of service in charge of the buffer mode for proper operation - 10 years. Warranty period: 5 years from the date of commissioning.

The development stage readiness: Introduced in production

Description of the development:
()
Construction: Electrodes: pasted grid plate of a lead alloy containing antimony, less than 2%; separation: on the negative electrode, separator envelope made ??of polymeric materials in combination with glass fiber, which activates the conductivity of the material, thus reducing the loss of functional capacity for life; area precipitation: in all elements below the plate is a region of sediment body and cover: made ??of high impact plastic, which provides ease of maintenance and mechanical stability throughout the lifetime. The two sides of the body element designated maximum and minimum levels of electrolyte performance poles: on the leakage of pressurized electrolyte pole with a massive brass inserts - M12; electrolyte: an aqueous solution of sulfuric acid density of 1,240 ± 0,005 g / cc.; Vent plugs: plugs design provides protection against splashing of the electrolyte, even at the time of charging with high voltage. Stoppers are used as an additional tool to prevent the ignition (to improve safety) and a catalytic recommendation (to reduce water loss), jumper: made ??of solid copper (30x3 mm), temperature range: from +5 to +45 ° C (preferably +20 ° C) installation: all valid standard setting in an upright position on insulated racks; life: in the mode of charging the buffer with proper maintenance - 10 years.

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua