BLOCK OF ALARM BSPT-10AM
Purpose of the development:
Block BSPT-10AM is designed for use with electric actuators and actuator performance and general-converts the output of the mechanism of the body (the drive) into a proportional electrical signal and an alarm to the extreme and intermediate positions.
Technical characteristic:
Specifications DB-10AM:
- Input - the angle of rotation of the shaft
mechanism in the range (0-90) ° or (0-225) °;
- Output signal:
DC 4-20 (0-20) mA;
with a load of up to 0.5 mA or 0-5;
under a load of up to 0.2 h;
- The amplitude of the ripple to 1%;
- The basic reduced error of no more than ± 2,0%;
- Hysteresis not more, from the range of variation
output of ± 1,4%;
- Differential hodmikrovyklyuchateley to 3 °;
- Commutation currents microswitch:
from 5mA to 1A at a constant voltage of 24 and 48;
- 20 to 500 mA at variable voltage
220V 50Hz or 60Hz;
- Weight of not more than 0.67 kg;
- Power consumption is not more than 0.75 W;
- Operating temperature range
relative humidity up to 95%
at 35 ° C from -60 ° C to +80 ° C.
The main parameters of the block BP-20AM:
- Powered by a 220V, 50 or 60 Hz;
- Power consumption of no more than 5 VA;
- Climatic version UHL4, 2, or 04.2 per GOST 15150-69;
- Degree of protection IP20po GOST 14254-96;
- Installation on DIN rail;
- Weight of not more than 0.2 kg;
- Dimensions 72x87, 5x62 mm.
The development stage readiness:
Introduced in production
Description of the development:
() The unit BSPT-10AM 10AM-DB consists of sensor and power supply unit 20AM. Sensor DB-10AM is installed under the hood mechanism (actuator) having the degree of protection of at least IP54. Block BP-20AM is installed in the cabinet and is designed for power supply and filtering the output of the analog signal transducer BP-10AM to ensure the stability of the parameters in the rigid electromagnetic environment at the facility. Block BSPT-10AM is designed based on the proven power BSPT-10AA in standalone version. BSPT-10AM Block replaces the old block BSPT-10M, and in addition, allows the use of 2-wire circuit, has a high pomehozaschitnost (IV group EMC), is stable and resistant to seismic impacts to 9 points on the scale of seismic intensity MSK, has advanced temperature range of operation.
Possibility of transfer abroad:
Licence's sale Realization of finished commodity
Photo
Country
Russia
For additional information turn to: E-mail: gal@uintei.kiev.ua
|