Purpose of the development: Inverter welding power source IIST «WELD 160S" is intended for manual arc welding with direct current straight polarity and reverse stick electrodes with rutile and basic structural and alloy steel, stainless steel and cast iron in the domestic and industrial applications.

Technical characteristic: SPECIFICATIONS: Parameter WELD-160C Rated voltage 50/60 Hz, 220 Welding current, A 20-160 The duration of inclusion (PX), 60% The limits of the voltage supply, V 180-260 The open circuit voltage, V 92 Max. power consumption 6.5 kVA Efficiency,% efficiency, 90% Dimensions, LxWxH, mm 305x125x165 Degree of protection IP 21 The diameter of the electrode, 1.5-4 mm Weight, kg 4.5

Advantages over analogues: Inverter welding power source IIST «WELD 160S" has several advantages compared to traditional transformer arc sources: reduced weight and dimensions for the same output parameters; easy ignition, steady burning, and the elasticity of the arc; stable arc with electronic regulation of the arc current in a wide range; minimal spatter; The high quality of welded joints with a deep root penetration with the formation of fine-grained structure.

The development stage readiness: Introduced in production

Description of the development:
()
The standard provides the following functions: Forced arc «ArcForce» - to prevent sticking of the electrode and increase the stability of the arc - at the instant the droplet electrode metal current is automatically increased to the optimum value; Antiprilipanie «AntiStick» - short-circuit after 0.5 seconds. automatically disable the welding current, which makes it possible to separate the electrode from the product without the risk of burn eyes. After separation of the source electrode automatically after 0.1 seconds, and restores its performance;

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua