FEEDING MECHANISM MP-3
Purpose of the development:
It is intended for the feeding steel cored welding wire into the weld zone as part of semi-automatic welding.
Recommended application field:
Enterprises with welding production.
Technical characteristic:
- Wire diameter - 1.2-1.8 mm;
- The range of the supply voltage of the motor - 4,0-28 V;
- Power consumption: at a load of 15 kg.sm and 5 V, no more than 3.0 A;
with a load of 20 kg.sm and 24 V, no more than 3.5 A;
- The number of revolutions of the output shaft:
under a load of 15 kg.sm and 5 V, no more than 30 rev / min;
with a load of 20 kg.sm and 24 V, no more than 140 rev / min;
- Maximum power consumption - 80 W;
- The mass of the product - not more than 2,5 kg;
- Gear ratio - 17.
The development stage readiness:
Introduced in production
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Licence's sale Technological document's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|