CONVERTER MODULE FOR LIQUID FLOW RATE TO THE CURRENT
Purpose of the development:
Designed to control the flow rate or velocity of the liquid media.
Recommended application field:
Oil refining, food processing, chemical industry.
Technical characteristic:
- The speed of disk rotation - about 0-8 / sec (frequency of the optical signal output from the photosensor - 0-320 Hz);
- The number of channels -1;
- Nominal frequency range of the input module, depending on the position on the board contactors from 0 to 60 Hz; from 0 to 180 Hz; from 0 to 320 Hz;
- Range of the output current 4 to 20 mA;
- Basic reduced to the range of conversion error +/- 0.25%;
- An additional error in the operating temperature range of +/- 0.15% / 100 ° C;
- Settling time of the output current from 10% to 90% - 2;
- Design: board diameter 58 mm, mounted in the sensor head.
The development stage readiness:
Introduced in production
Description of the development:
() Sensor type - carries magnetic coupling of the rotating impeller in the liquid perforated disc interrupts the light output optocouplers. The number of holes in the disc - 40. Two-wire connection, the transmitter is included in the gap between the power source and the load and is powered 4-20 mA load current. Permissible voltage 6-30 V.
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Licence's sale Technological document's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|