Purpose of the development: Designed for drying and mechanical purification of air used to purge the tank of power transformers and other electrical devices in the process of installation, repair and maintenance to protect the electrical insulation from moisture during the depressurization of the active part. When you work in the winter time is provided heating dry air to a temperature of 100 ° C.

Recommended application field: The unit can be used for regeneration (drying) of solid adsorbents (silica gel, zeolite) used in other equipment, as well as cooling of the adsorbent otregenerirovannogo dry air.

Technical characteristic: Parameter Value The performance of a dry air, m3 / h 150 2 The dew point of dry air, C °, not more than minus 50 3 The pressure of dry air, MPa, not more than 0.08 4 adsorbent zeolite NaA (NaX) 5 rotary compressor: - Capacity, m3 / h 150 - Air pressure, not more than 0.05 6 The mass of the adsorbent in the two adsorbers, 400 kg 7 Low heat of dry air at the output of the installation, ° C to 100 8 The temperature of the sorbent regeneration of other equipment, ° C 380-420 9 Number of adsorbers, ea. 2 10 Temperature of regeneration of the adsorbent, C ° 380-420 11 Power of the heater, kW, not more than 2h18 12 Power consumption, kW 20 13 Power supply three-phase AC, 50 Hz, 380 14 Overall dimensions, mm, not more 1450x1150x1950 15 Weight, kg, not more than 1200

Advantages over analogues: Manufactured according to TU U 34.04624312.014-97 and has certificates of compliance systems UkrSEPRO Ukraine GOST R State Standard of Russia. Climatic versions - according to GOST 15150-69. Average life - at least 10 years warranty - 1 year. Attendants - 1 person. Environmental safety - according to GOST 12.1.005-88. Fire safety - according to GOST 12.1.004-91. Electrical - GOST 12.2.007.0-75.

The development stage readiness: Introduced in production

Description of the development:
()
Installation in a metal container, inside which is mounted equipment: compressor, two air heater, two adsorber, air filter, control box. The design of the installation provides a continuous supply of dry, purified from mechanical impurities, the air for 27 hours at an ambient temperature of 20 ° C and a humidity of 80%. Then the installation is on regeneration. 400 kg of zeolite regeneration occurs within 12 hours. Air drying is carried out to install an adsorption method with the use of solid adsorbents. For recovery of wet adsorbent provided the work set in the mode of regeneration of the adsorbent.

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua