Purpose of the development: The device is designed for top up oil-filled high-voltage bushings sealed degassed transformer oil during installation, repair and operation of power transformers.

Technical characteristic: Parameter Value A capacity for one full stroke, max 150 cm3 2 Outlet oil pressure, kgf/cm2 3 ... 15 3 The volume of the original oil tank, l 5-25 * 4 Number of tanks 3 ** 5 Length of pressure hose connector, m 8 *** 6 The mass of the device, kg, no more than: - At baseline 40.0 - In working order (with the initial tank of oil, sleeves, equalization tank and a handle) 60.0 7 Overall dimensions, mm, no more than: - In the transport position 920x420x430 - In the position 1200x420x1440

The development stage readiness: Introduced in production

Description of the development:
()
The device consists of a piston pump with manual transmission, frame, 3 interchangeable tanks, stop and control valves, pressure-vacuum gage and connecting hoses. The design of a piston pump eliminates air leak from the external environment (a water seal). Tanks are made airtight and allow long-term store degassed oil. Compound pressure and vacuum gauge and shut-off valve bellows allow you to control the pressure in the tank. The pump is mounted on a frame made ??of rectangular metal tubing and two metal wheels, which allows the transportation of the device within a substation and prevents tilting the device in operation. Suction and discharge valves and shut-off and control valves and connecting pipes provide the filling of tanks degassed transformer oil and pumping it to the high inputs. Manufactured according to TU U 29.2-21189148-003-2001 and has certificates of compliance systems UkrSEPRO and GOST State Standard of Russia.

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua