HYDRAULIC PRESS RULING FOR AXIAL BLANKS
Purpose of the development:
It is intended to eliminate the defects of elongated shape (curvature) axial round billets.
Recommended application field:
mechanical engineering
Technical characteristic:
Terms of Use:
- Ambient temperature from +10 to +50 C;
- Relative humidity up to 85% at an ambient temperature of +25 ° C;
- The temperature of the beginning of the changes does not exceed 700 ° C;
- The maximum force in one working hydraulic cylinder, ton -340;
- The maximum force on the navigating hydraulic cylinder, ton - 95;
- Operating force on the kickers, tf - 0.9;
- The speed of movement of the workpiece on the roller conveyor, m / min - 9.08;
- Max. theoretical cycle changes, min 7.5;
- Nominal capacity of the plant, pieces / hour - 7;
- Installed power motor kW - 60.2;
- Dimensions in plan, m - 12,568x8,350;
- Height above floor level, m - 1,512;
- The depth below floor level, m - 0,7;
- Gross weight, ie - 77.607.
The development stage readiness:
Introduced in production
Description of the development:
() Setting the axial straightening preparations designed to eliminate defects of elongated shape (curvature) of round billets of variable axial section (for rolling stock) obtained by forging, at + 700- 550 C.
The mechanical properties of the material blanks on customer specifications.
Information about newness of the development:
there are inventor's certificate -- 1 items
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Licence's sale Licence's sale Technological document's sale Realization of finished commodity Joint production, sale, exploitation
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|