COATING THICKNESS TP-34
Purpose of the development:
It designed to measure the thickness of the dielectric and conductive non-ferrous (except ferromagnetic) coatings on ferromagnetic materials (sensors ID0, ID1, ID2, ID3)
anodic oxide, paint, and other insulating coatings on non-ferrous materials (sensors PD0, PD1), bitumen and thick dielectric coatings on products from conductive materials (sensors PD2, PD3, PD4), as well as for the control of surface roughness after blasting and pesko- (sensor DSH1).
Recommended application field:
Машиностроение
Technical characteristic:
Measuring the thickness of the dielectric and conductive coatings on parts made of ferromagnetic metals and alloys:
Mark sensor monitoring range measurement error of the sensor dimensions, mm
Sensor ID0 0-300 mm +/- (+ 3% 1 micron) diameter 5x40
Sensor ID1 0-500 mm +/- (+ 3% 1 micron) diameter 7x14
Sensor ID2 0-2000 mm +/- (+ 3% 2 microns) diameter 9x35
Sensor ID3 0-5000 mm +/- (+ 3% 2 microns) diameter 18x30
Measuring the thickness of the dielectric coating on the details of the non-ferrous metals and alloys:
Sensor PD0 0-500 mm +/- (+ 3% 2 microns) diameter 12x35
Sensor PD1 0-2000 mm +/- (+ 3% 2 microns) diameter 12x35
Measuring the thickness of the dielectric coatings on products from electrically conductive materials:
Sensor PD1 0.5-12 mm +/- (3% ± 0.02 mm) diameter 15x50
Sensor PD1 1-30 mm +/- (2% + 0.03 mm) diameter 40x50
Sensor PD1 1-60 mm +/- (2% + 0.05 mm) diameter 70x60
Control of roughness, Rz:
Sensor DSH1 2-360 microns +/- (+ 3% 2 microns) diameter 12x45
Power -Battery type CROWN or battery 9V;
Operating temperature range - 5 plus minus 400C;
Dimensions 145x82x32 mm;
Unit weight of 0.4 kg.
Advantages over analogues:
- Lightweight and durable metal housing with durable keyboard;
- Easy set-up and a simple menu;
- Large symbols indicator, a special indicator measurement;
- The minimum thickness of the display mode;
- Indication of battery discharge;
- Shut-device;
- The degree of ingress protection IP54.
The development stage readiness:
Introduced in production
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Licence's sale Licence's sale Technological document's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|