Purpose of the development: Designed to measure the thickness of products from metallic and non-metallic materials when they are accessed with one hand.

Recommended application field: Many industries

Technical characteristic: - The range of controlled thickness (Steel) - 0,8-200 mm; - Ultrasound velocity -100-9999 m / s; - Absolute error of measurement, t, mm - 0.05 + 0,01T; - The number of memory cells results - up to 4000; - Nutrition - battery type or battery CROWN 9; - Operating temperature range for the device - minus 5 plus 400C; - Dimensions - 145x82x32 mm; - Weight of the device - 0.47 kg.

Advantages over analogues: - Lightweight and durable metal body is sealed with a robust keyboard; - Easy setup and simple menu of storing a single keystroke; - Large symbols indicator, a special indicator of acoustic contact; - Built-in calibration sample; - The minimum thickness of the display mode; - 10-step gain control; - Updating the results of measurements on the products of small thickness; - Built-in memory and send the results to a PC via RS232C; - Discrete measurements - 0.01 mm or 0.1 mm; - Shut-device; - The degree of ingress protection IP54.

The development stage readiness: Introduced in production

Description of the development:
()
Simple and reliable device used in the process of manufacture, repair or use of its products (sheets, containers, pipes, pipelines, bridges, housing, transport and other structures) in many industries and is designed for a long period of work. Easy change and a wide range of converters provides a wide range of measured thickness (from 0.8 mm to 200 mm), allows you to control corroded products with high roughness. In the measurement of ultrasonic thickness gauge UT-31, using the contact method of providing acoustic coupling clamp contact surface of the transducer to the surface of the object under control, which caused the contact grease. Thickness can be equipped with different transducers for ranges kontrolirkemyh thickness: 2, 200.0 mm; 1,0-20,0 mm; 1,5-75,0 mm; 0,8-25,0 mm; 0,8-10,0 mm.

corresponds technical description
Conforms to technical characteristic

Possibility of transfer abroad:
Licence's sale
Licence's sale
Technological document's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua