ULTRASONIC THICKNESS GAUGE ULTRACON UT-31 AND UT-31M
Purpose of the development:
Designed to measure the thickness of products from metal and non-metal materials (sheets, containers, tubes, pipes, bridges, housing, transport and other structures) are accessed with one hand in the manufacturing process, operation or repair in various industries.
Recommended application field:
Different areas of the economy.
Technical characteristic:
The range of measured thickness (steel), mm 0,8-200
The range of the ultrasonic velocity, m / s 1000-9999
Absolute measurement error, mm (0.05 T 0.01)
The number of memory cells results 4000
Number of pages of memory for storage of up to 200
Overall dimensions 145h82h32
Operating temperature range, ° C -5 to + 40
Power Battery 6F22 (Crone)
or battery
Weight of electronic unit with a battery, kg 0.4
Advantages over analogues:
• Large display characters;
• special indicator acoustic contact;
• The display mode the minimum thickness;
• Easy manual gain control;
• write to the memory with one click *
• Non-volatile memory measurements *
• Memory paging *
• adjusting sensor nonlinearity in small thicknesses;
• Transfer data to a PC via RS232C; *
• Manual and automatic Resolution: 0,01 mm or 0.1 mm;
• shut-device;
• degree of ingress protection IP54.
* - To modify the UT-31.
The development stage readiness:
Introduced in production
Description of the development:
() Devices are manufactured in a compact and robust metal housing with durable keyboard and are designed for continuous operation.
Easy change and a wide range of converters provides a wide range of measured thickness (0.8 to 200 mm), allows the measurement of products of various shapes, including colored, with a variety of physical and mechanical properties, as well as products with high roughness.
Devices are manufactured in a light and robust metal housing with durable keyboard. Easy change and a wide range of converters provides a wide range of measured thickness (0.8 to 200 mm).
UT-31M modification differs from the full version of the device VT-31 simplified bundle and lack of memory.
Measurement characteristics remain unchanged.
Simplified modification unit UT-31M6 allows measuring the thickness of products from six of the most common materials (at a fixed rate of ultrasound for each item):
- Carbon steel (5920 m / s);
- Stainless steel (5660 m / s);
- Aluminum (6350 m / s);
- Gray cast iron (4570 m / s);
- High Density Polyethylene (2200 m / s);
- Glass (5750 m / s).
To prepare for use, you turn on the device, select the material and calibrate the built-in sample
after which the instrument is ready for measurement.
The device comes in 3 different models
Possibility of transfer abroad:
Licence's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|