AUTOMATIC FIRE EXTINGUISHING AND GAS CONTAMINATION CONTROL
Purpose of the development:
Automatic installation of fire and gas control (APM and short) is designed to address
automatic fire detection by factor - the smoke, the flames, the temperature in the smoke
the protected area, the temperature in the protected area, automatic detection
excess gas pollution, extinguishing control.
The unit provides simultaneous transmission of information to the monitoring subsystem and issue
control signals for opening and / or change of the operational conditions.
Recommended application field:
Fire safety system.
Technical characteristic:
Specifications:
--- Power setting of 50 Hz 220 V from the main network (two inputs connected to the ATS unit)
= 24 from the reserve network;
--- Auto-switching networks (primary-backup)
--- Automatic charger;
--- Power consumption 1.2 kW.
Advantages over analogues:
When the threshold gas pollution 10% and 20% of the unit provides:
--- Inclusion of an appropriate light and sound siren "SN410%" and "SN420%";
--- Delivery of signals for emergency stop equipment in the protected area.
Service life - 10 years manufacturer's warranty - 2 years.
The development stage readiness:
Ready for application
Technical and economic effect:
Installing AMP and short has a wide range of functions and high performance
features:
--- Switch indicator light on the triggered alarms;
--- Transfer to extension units of information in the control devices;
--- Switch on the front panel display light a fire;
--- The display on the LCD instrument number and information on the type of detector is triggered, number of loops;
--- Inclusion of internal beeper volume level not less than 85 dB;
--- Delivery of signals of the fire to adjacent systems;
--- Start extinguishing the chosen field;
--- Output to the PC;
--- Delivery of signals to activate automatic fire extinguishing devices and other fire automatics.
Description of the development:
() Installing AMP and CG is a set of targeted and non-address devices, power converters,
and detectors of which is equipped with microprocessor-based information management installation
which provides:
- Control t raise alarms firefighters controlled thermal response of IPT with t
from 55 * C to 600 * C, the detector IPT AMVT with external thermocouple;
- Control of the controlled environment are smoky fire smoke alarms
SDI with the sensitivity threshold of 0.05 to 0.2 dB / m;
- Control over an open flame in the protected object alarms fire flame IPP
with the sensitivity threshold 17-25 m;
- Measuring range of calibration gas concentration plant for component (methane) - from 0 to 50% LEL.
- Provision of audible and visual alarm for each channel when triggered threshold devices.
- Avtovydachu signal "Fault K3" in case of a communication line;
- To view the display.
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Technological document's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|