SMOKE PROTECTION SYSTEM
Purpose of the development:
Smoke protection system - a complex of technical means for
Forced removal of smoke from the rooms and how the evacuation of buildings
in case of fire. Automatic control system of technical means of smoke
protection is based on the components of the targeted fire alarm "Photon-A" allows
the following functions:
--- Include notification of the fire;
--- Include exhaust ventilation system;
--- The fan air overpressure;
--- Flame-retardant control valves;
--- Operate lifts in the "FIRE".
Recommended application field:
Fire safety system.
Technical characteristic:
For smoke protection system uses detectors IPL - Fire
Heat locomotive - designed for acquisition and information
fire on the locomotive and other objects when the ambient
air above the permissible value.
Activation temperature of 100 ° C to 110 * C *, giving the signal is
contact opening.
Advantages over analogues:
System "Foton-A" when triggered automatic fire detectors installed
within the protected area, which are issued by triggering signals of fire, forms
command signals to turn off equipment and ventilation systems, the activation of the executive
smoke protection equipment, backwater vozduha.Upravlenie system is
in automatic or manual mode with fire post on push-button stations,
installed at the emergency exits.
Service life - 10 years manufacturer's warranty - 2 years.
The development stage readiness:
Ready for application
Description of the development:
() To address control on, the fan exhaust ventilation system
control the opening (closing) shutters fire, elevator control on commands
control unit PU (PU-A1 or IP-A1PT) transmitted on the interface RS485, used
Relay peripherals BRVU-A24, part of a system of targeted fire alarm
"Photon-A." Shield storey Type I is intended to bring one address plume issuing
control signals to the fire dampers, valves, monitoring, control,
push-button stations. Valve operation is carried out on the device IP commands transmitted
the interface.
Shield storey Type II is designed to enhance control and monitoring signals shield type I.
When triggered fire alarms to CP audible signal and light panel "Fire",
The display shows the location of the activated detector (floor apartment) and the number
triggered detectors, their type.
To display the locations of sensors, information on opening valves and all information
the system as a whole is intended mimic. It is produced for each object individually
through a set of modules of the controller, power indication. Has a built-in power backup.
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Licence's sale Technological document's sale Creation of joint enterprise Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|