Purpose of the development: Flaw UD-1 is designed to detect defects, such as continuity and uniformity of materials to semi-finished products and welded joints, to measure the depth and origin of their occurrence, thickness measurement, measuring the speed of propagation and attenuation of ultrasonic (UT) in the material.

Recommended application field: Flaw allows you to solve a wide range of tasks - from thickness measurements of thin products, to large-size casting flaw. Of welds and base metal; find places corrosion, cracks, internal bundles and other defects; to determine the coordinates and estimating defects, such as continuity and uniformity of material in products made of metals and plastics; measurement of the thickness of the product.

Technical characteristic: The range of measured depth (steel), mm 6000 Controllable gain flaw 115 dB in 0.1 dB steps Temporary adjustment of gain (TCG) flaw range up to 70 dB, with the construction of the curve to 16 reference points entered manually or from the reference reflector Control zone two independent zones, start and width change over the entire range of sweep Interrogator customizable, with an amplitude of 350 V, with change interval from 12.5 to 500 ns, in steps of 12.5 ns Memory settings with A-scan (B-scan and C-scan), limited size SD-card control protocols (signal, envelope, and the measurement result, the parameters of the device, the date, time and name Protocol), the limited size of the SD-card Interface Bluetooth, SD-card Operating temperature range -20 ... +50 ° C

Advantages over analogues: Frequency range with continuously variable from 0.2 to 10 MHz Two independently controlled gates (A and B) and customizable for every gate SDA Determining the level of the signal and the origin of defects Automatic or manual building TCG curve (up to 16 points) Presence in flaw mode control using DGS diagrams Two kinds of signals: detection and radio Construction and processing flaw in A, B scans. Modes: the envelope, freezing and display of the beam for the convenience of the inspection Flaw detector implemented a unique system output, which increases the usability of the flaw, and performance monitoring Flaw has a color, contrast TFT-LCD Opportunity to order a case with attachment "hands free" for flaw

The development stage readiness: Introduced in production

Description of the development:
()
Flaw UD-1 with a color display and a minimum size - it is the best choice for expert ultrasonic testing. Powerful, lightweight and portable flaw detector, in an ergonomic impact-resistant metal case. Flaw UD-1 can measure the thickness of products with a high accuracy, output signal in the form of A-and B-scans and has all the features for the complete documentation of controls. Flaw has a phenomenally long battery life - 24 hours of the flaw. Flaw NOVOTEST UD-1 meets all the requirements of modern digital flaw detector, while keeping costs lower than any existing analogues! Ultrasonic flaw detector available in a version with standard battery (flaw works up to 10 hours), and comes with a reinforced battery flaw (flaw works off up to 25 hours). Unique low power flaw allows to control up to 3 shifts in a row on a single charge deofektoskopa. With our flaw can safely conduct work in any conditions. The delivery of ultrasonic flaw detector UD-1 ultrasonic flaw detector UD-1 (electronics) Converters (2 pcs.) Cable Lemo-Lemo power supply and battery charger memory card sheet, user manual bag

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Licence's sale
Technological document's sale
Creation of joint enterprise
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua