PRESSURE SENSOR UNIVERSAL TYPE DDU-M PEN.T3
Purpose of the development:
Pressure sensor type universal DGS-M is designed for:
- Conversion of excess input or differential pressure in one of the following
standard output signals:
a) DC signal (0-5) mA;
b) direct current signal (4-20 mA);
c) DC voltage (0-10);
d) AC voltage (0-0.5) and 50 Hz;
- Manage the external circuit to the 2nd independent channels;
- Indication of the inlet pressure;
- Calculate the square root of the value of the input value at
sensor is used in devices accounting;
- Inclusion of the direct or inverse conversion characteristic.
Recommended application field:
Energy.
Technical characteristic:
Main technical data:
--- Depending on the version, the sensor is designed to work with excess
or differential pressure;
--- The minimum operating range of 0 to 2.5 kPa;
--- The maximum operating range of 0 to 1000 kPa;
--- The number of performances, 5;
--- The number of sub-bands, switched to version 3;
--- Maximum permissible sensor error permitted
on the range of the output signal, no more than + / - 1%;
--- Temperature effect for every 10 C * changes
temperature within the operating range of + / - 0.5%;
--- Limit of basic errors
switching circuit control external devices
expressed in the range of the output signal, no more than + / - 1%;
--- Area return trip control circuit
external devices in the range of the output
signal, no more than + / - 1%;
--- The number of digits of the display, 3;
--- Power is provided by the sensor network:
stress (36 + / - 4);
frequency (50 + / - 1) Hz;
--- Power consumption at nominal
supply voltage, maximum, 10 VA;
--- Overall dimensions of the sensor, mm, 60 x 205 x 65;
--- Connection size threaded fitting, M20 x 1.5;
--- Weight Sensor, kg, not more than 1.5.
Advantages over analogues:
The sensor is designed for use in place of sensor DN, DT, DNT and the like.
Recommended instead of differential pressure gauge DM transmitters MED
and "Sapphire" to the corresponding measurements. Through the use of modern
components and the use of a microcontroller to handle the results of measurements, the sensor
allows high conversion accuracy, along with the versatility of applications.
Depending on the input pressure, each performance of the sensor can be switched to one
of the three sub-bands.
The development stage readiness:
Ready for application
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Licence's sale Technological document's sale Creation of joint enterprise Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|