COATING THICKNESS GAUGE NOVOTEST ТП-1
Purpose of the development:
Designed for rapid non-destructive testing of thickness:
- Paint and other dielectric (mastic, anodic oxide, PVC, Teflon, radio-absorbing, etc.) and metal plating on steel;
- Paint and other dielectric (mastic, anodic oxide, PVC, Teflon, radio-absorbing, etc.) and metal plating on non-ferrous metals and non-ferrous alloys;
- The thickness of bitumen and other thick protective coatings on various metals and alloys;
as well as temperature, humidity and dew point, estimating the depth of grooves and surface roughness.
Recommended application field:
Engineering and other industries.
Technical characteristic:
The range of measured thickness (depending on the sensor type) 0 m ... 60 mm;
Overall dimensions 120x60x25;
Operating temperature range, ° C -5 ° C. .. +40 ° C;
Power 2 AAA batteries;
Operating time, hours, not less than 20;
Weight of electronic unit with a battery, kg 0.2.
Advantages over analogues:
Advantages of Coating Thickness NOVOTEST TP-1:
- A wide range of measured thicknesses
- The convenience and ease of measurement,
- The minimum number of controls - one button - one function,
- Graphical display with backlight
- Automatic detection sensors
- Indication of the type of connected sensor
- Monitoring the state of the battery.
The development stage readiness:
Introduced in production
Description of the development:
() The design of the device includes in its membership the electronic unit and are connected with the sensor connector. Plug connection is located on the upper end of the casing. The control buttons are located on the front panel, which also is a graphical indicator. At the bottom rear of the device under the hood is a compartment for installing the batteries.
The operation principle is based on measuring the frequency of the generator, which is included in the loop coil eddy current parametric converter. Generation frequency depends on the thickness of the coating.
The measurement result is displayed on the digital display.
LED device is designed to display the measured coating thickness in mm or m. On display also provides information on the state of battery charge and the type of sensor connected.
Standard delivery Coating Thickness NOVOTEST TP-1
electronics Coating Thickness
one sensor (optional)
set of measures coating thickness
reference base
2 batteries (AAA)
charger
passport
packing containers
Additional options for the order
additional sensors to the surface thickness (depending on the monitoring requirements)
battery
charger
set of measures coating thickness
reference base
Rechargeable stripping machine
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Realization of finished commodity Joint production, sale, exploitation
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|