Purpose of the development: Universal Hardness (combined) NOVOTEST T-UD1 designed for operational non-destructive testing of hardness: - Metals and alloys on standardized CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV); - Metals with different properties from steel (for example, non-ferrous metals, alloys, cast iron, etc.) with five additional scales for calibration; - The use of the scale tensile strength (Rm) in accordance with GOST 22791-77 for determining the tensile strength of carbon steel products pearlitic by automatic conversion from the scale Brinell hardness (HB).

Recommended application field: Machine building, metallurgy, energy and other industries.

Technical characteristic: Range of hardness measurements HRC, HRC 20 - 70 Brinell HB 90 - 450 Vickers, HV 230 - 940 tensile strength (tensile strength), MPa 370 - 1740 The basic error of measurement of hardness: + / - 2 units. HRC; + / - 10ed. HB Overall dimensions of the tester, mm 120x60x25 Operating temperature range, ° C -5 to + 40 Power 2 x AAA batteries Operating time, hours, not less than 20 Weight of electronic unit with a battery, kg 0.2

Advantages over analogues: The advantages of the device - 2 removable sensors: ultrasonic and dynamic, - No restrictions on the control of hardness (by weight, configuration, structure, degree of mechanical and thermal treatment, etc.) - Allows you to estimate the change in the hardness of the hardened layer depth product and the effect of surface stress - A wide range of measurement of hardness, - The convenience and ease of measurement, - The minimum number of controls hardness, - Graphical display with backlight - Automatic detection sensors - Indication of the type of connected sensor - Monitoring the state of the battery.

The development stage readiness: Introduced in production

Description of the development:
()
Combined hardness implements methods rebound and ultrasonic contact impedance (UCI). The combination of both methods allows control of all products from a single metal hardness tester. Portable combined hardness T-UD1 can measure the hardness of metals and alloys in all conditions. The device has a small size and weight, which allows the use of the device in difficult conditions and in remote places. Portable hardness combined T-UD1 excellent replacement for stationary hardness - the accuracy is the same as the portable hardness tester is cheaper and more convenient. The device also provides a measure of the hardness of other materials, for example, measure the hardness of cast iron, non-ferrous metals. Hardness tester, ultrasonic sensor measures the hardness of thin and small parts. T-UD1 - the base model of the combined hardness tester. If you absolutely need a hardness tester memory, the connection with the PC, then pay attention to the hardness combined T-UD2. Scope of supply: an electronic unit ultrasonic sensor hardness T-U1, sensor dynamic hardness T-D1, 2 batteries with charger, sheet, user manual, cables packing containers.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Licence's sale
Realization of finished commodity
Joint production, sale, exploitation

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua