Purpose of the development: Measuring the strength and homogeneity of the concrete and other construction materials ultrasonically NOVOTEST IMSP-U + T + D is for: Detecting voids, cracks and defects that occur during the production and operation of structures (for process control and inspection of facilities); Control the strength and homogeneity of the concrete (GOST 17624, Guidelines IBC 62-2.01), brick (GOST 24332), construction and composite materials, structures, bridges and hydraulic structures; Measure the depth of cracks in the products and designs; Determine the density and elastic modulus uglegrafitov and fiberglass; Definition audio index abrasives and building ceramics; Estimates of porosity, fracturing and anisotropy materials; Assess the degree of maturity of concrete in monolithic concreting.

Recommended application field: construction

Technical characteristic: Measurement range of the propagation time of the ultrasonic vibrations, ms 10 ... 9999 The measurement resolution of the propagation time of the ultrasonic vibrations, ms 0.1 Operating frequency of the ultrasonic vibrations, 50-100 kHz Base surface sounding measurements at 120 mm Excitation voltage, V to 600 Overall dimensions 122x65x23 Operating temperature range, ° C-20 ° C ... +40 C Power 2 x AA batteries Operating time, hours, not less than 10 Weight of electronic unit with a battery, kg 0.2

Advantages over analogues: The advantages of measuring the strength and homogeneity of the concrete (construction materials) NOVOTEST IMSP-U + T + D Calculation of strength, density and modulus of elasticity in the pre-installed calibration curves; Calculation of the index sound abrasive products; Memory results; Communication with the PC; Further analysis of the results using a specialized computer program; Lack of critical results to the clamping force transducers; Ability to work on large bases sounding with converters for through-sounding; Improved balance between the "signal to noise"; Universal transducers for emission and reception of high-impact; High voltage excitation of probe pulses. Increased excitation power of probe pulses, high amplification path can significantly increase the base sounding and work on materials with high attenuation. Sensor surface sounding has a base of 120 mm, suitable for concrete samples sounding-cubes.

The development stage readiness: Introduced in production

Description of the development:
()
The device allows to control the strength and homogeneity of the concrete (GOST 17624, Recommendations NIIZhB IBC 62-2.01), brick (GOST 17624) and other materials under the composition and surface testing in products and structures, on construction sites, in the process control, inspection of buildings structures. Allows you to control the strength of concrete on the characteristics of unknown composition TSNIIOMTP. Has the function of determining the depth of cracks in surface sounding. Availability of imaging signal (A-scan). The possibility of control concrete (and other) building structures for internal defects, discontinuities. Improving the accuracy of measurement of time intervals by allowing manual selection of the moment trip meter. Modifications gauge the strength of structural materials NOVOTEST IMSP-U + T IMSP-U - the most simple modification to measure the strength of building materials (concrete) IMSP-U + T - also allows for control of uniformity, strength of concrete, measure the depth of cracks IMSP-U + T + D - the most versatile model in which additional functions are implemented flaw detector for building materials and structures. The delivery of concrete strength meter (building materials) NOVOTEST IMSP-U + T + D: an electronic unit sensor surface sounding with a set of cables. control sample 2 batteries with charger, sheet, user manual, packing containers. Additional options for the order: Set of converters for through sounding, Cone, waveguides, extension cables, Bag.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Licence's sale
Realization of finished commodity
Joint production, sale, exploitation

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua