Purpose of the development: Locator (Cable locator) NOVOTEST TKI-1 is designed to detect the location of engineering communications, cables, pipes, tracing (locating pads) pipes, cables and other communications to a depth of 10 meters.

Recommended application field: Construction, communication, communications, and utilities.

Advantages over analogues: For the first time in CIS locator is equipped with unique modes! Locator (Cable locator) TKI-1 has a display mode of communication with respect to the operator. This mode allows you to simplify the search times and trace cables and pipelines. Operator locator does not work with digital signal values, and communication with the image on the screen. This display mode information is not used earlier in Locators Cable locator and produced in the CIS, so working with classic domestic Locators (Cable locator) is not very convenient and trudoemnko. In modern foreign Locators such a regime is the norm. Us managed to implement a modern convenient mode display information about the traced communications to our new Locator (Cable locator) NOVOTEST TKI-1. In order for the user to see the screen locator real image traced line (cable line) in the receiver antenna uses four separate channels, and the resulting information is subject to complex processing. All this allows the consumer to get the locator with unrivaled ease of use! It's all just one of the benefits of locator, and a lot of them: color touch screen display, durable metal housing, modern comfortable and reliable connector Lemo, ergonomic and sealed the antenna locator, vibrosignalizatsiya, Spectrum Analyzer Mode signal to digital signal display, the display mode communication, several kinds of buzzer, automatic and manual gain setting, the lithium ion battery, the recording mode the GPS and mapping pipeline etc.

The development stage readiness: Introduced in production

Description of the development:
()
Locator (Cable locator) TKI-1 is a versatile devices in the process of tracing communications (cables, pipelines) to measure the depth of their pads, with the mapping of depth in real time on the screen Locator (Cable locator). Digital display mode Classic display mode for Locators and Cable locator. In the central part of the screen displays the received Locators (Cable locator) signal. The "+" and "-" are used to manually adjust the gain, the current level is displayed by a digital signal value. At the top of the screen are buttons set locator relative frequency (in this case 8926 Hz), set the buzzer, and a button automatically set the optimum gain level. Select function is press on the screen device. At the bottom of the screen are the navigation buttons to control mode settings Locator (Cable locator) button to go to the signal spectrum analysis mode, and an area in the central part of the screen that displays the service information (state of charge of the battery, overload alarm, display GPS). Graphic display mode: Unique mode of signal processing receiver locator and processing to visualize the track (the pipeline, cable line directly on the display.) The top and bottom of the display Locator (kabeleiskalya) are identical to standard digital mode. In the central part of the display screen is a circle - is shown schematically in the field of vision Locator (Cable locator). In the center of the screen is a schematic (top view) to show the operator the blue dashed line shows the actual communication (pipe, cable, etc.). Forward direction on the screen image of the operator towards the front of the device corresponds to the operator. Deflection angles of communication on the display, as well as offset to the left and right of the operator with the real situation of communication, the operator. When searching for communications operator must move and rotate in such a way to combine the required communication with the image communication on the display. Thus, the search of communication becomes a simple "get to the line", as on the display the operator receives the same image, as if the communication itself was visible to the operator. Mode analysis of the signal: Designed to analyze the spectrum of the received signal receiver. It can be used for a wide range of problems, both in trassopoiske and general industrial applications that require the analysis of signals in the frequency range of 0-10,000 Hz. Features include a choice of linear or logarithmic scale and frequency of the signal level. This feature allows you to select any signals (for example, very little useful signal to background noise with large amplitude). Selecting the frequency band filter (to receive the selected signal bandwidth) is right on the screen of the device, thanks to the touch screen. In this example, the selected frequency band 4482-5482 Hz in the spectrum is shown in gray and highlighted in red.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Licence's sale
Realization of finished commodity
Joint production, sale, exploitation

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua