COOLANT-CONCENTRATE FOR METAL MACHINING
Purpose of the development:
Pasta-emulsion concentrate and concentrate designed for cold and moderate-heat of metal forming (forging, rolling, drawing, etc.)
Recommended application field:
Metallurgy, machinery
Technical characteristic:
Lubricating properties of water emulsions:
1) OL-MAH-E1_P1a (5% emulsion)
2) OL-MAC E1_P1bvg (5% emulsion)
Load, kN
Critical 1) 1.57 2) 1.65
Welding 1) 1.92 2) 1.98
Scar, d, mm
1) 0.85 2) 0.80
Lubricity maselnyh MHZ
1) OL-EOM-M2_P1a
2) OL-MHD-M2_P1bvg (5% emulsion)
Load, kN
Critical 1) 1.62, 2) 1.67
Welding 1) 4.75 2) 5.25
Index of wear, I
1) 80, 2) 87
Scar, d, mm
1) 0.50 2) 0.56
The coefficients of friction at the beginning and end of the test fn / FK
1) 0.11 / 0.12
2) 0.12 / 0.13
Tribological performance of the new plastic biopasty Ol-MAI_Pbvg
1) a new pasta with merolom, mersolom-nS
2) new paste without merola, mersola-nS
Load, N:
Critical 1) 1260 2) 940
Welding 1) 2660 2) 2370
Index teaser 1) 69, 2) 52.5
Wear scar diameter, mm 1) 0.57 2) 0.49
Koєffitsient friction 1) 0.032, 2) 0.032
Advantages over analogues:
New Motr is environmentally friendly, as derived from the technical oils. Used to generation of an almost complete, and the small of her remains can be used as a technical detergent, which can be discharged to the municipal sewer system. Completely safe to the body working personnel, does not cause irritation of the respiratory tract, eyes, and skin.
The development stage readiness:
Introduced in production
Description of the development:
() Pasta and concentrate emulsiya Concentrate designed and produced based on chemically-modified vegetable oils technical and some cheap mineral oils without additives (including reclaimed). They contain a special anti-wear and extreme pressure additives, which are also obtained from vegetable oils. Based emulsol-concentrate directly on the production of metal working solution is prepared by diluting the concentrate with potable water at a ratio of moderate hardness of 5 to 9, depending on the thermal stress processes, provided vigorous stirring for 10-15 minutes.
This Cutting process fluid has been applied in the enterprises of the city Khmelnitsky Ukraine.
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Combinated reduction to industrial level Realization of finished commodity Joint production, sale, exploitation
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|