SET FOR CASTING OF ALUMINUM ALLOYS UNDER ELECTROMAGNETIC PRESSURE
Purpose of the development:
Designed for casting of aluminum alloys having the geometry of the "ring", "frame", "glass" or representing a combination of these types.
Recommended application field:
Non-ferrous metallurgy.
Technical characteristic:
-capacity to install - 250, 400, 600 kg;
-the number of forms - 1 or 2 pcs .;
Maximum dimensions of the casting - 500 (1000) mm;
-Performance - castings up to 50 pcs. / h;
The mass of metal poured portions - 0.5-50 kg;
maximal consumption of metal - 3.0 kg / s;
Meals - three-phase alternating current voltage of 380/220 V (50 Hz).
The development stage readiness:
Introduced in production
Description of the development:
() The installation uses the principle of non-hydraulically dispersed gating system (industries - LEMD). The utilization of metal to 0.98.
The unit provides:
-gomogenizatsiyu chemical composition and temperature uniformity by volume liquid metal alloy (for example, alloys of Al-Zn, are prone to delamination in a liquid state) due to forced convection at the electromagnetic induction heating and stirring;
-regulated feeding aluminum alloys under low pressure electromagnetic, including those having low fluidity, dispersed by non-hardening in the mold sprue and exposure of the metal during crystallization under overpressure.
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Licence's sale Technological document's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|