POLYMERIC REINFORCED PIPES
Purpose of the development:
Steel-reinforced plastic pipes are intended for use in water supply networks,
sewers, sewage, as in public services, and in industry for the challenge of marine waters.
Recommended application field:
Steel-reinforced plastic pipes can be used for water intra-
and main water supply, gravity (storm, households and industrial fikalnyh) collectors
sewage, as in public services, and in industry for the challenge of marine waters.
Technical characteristic:
Specifications:
1 Working pressure 1.0-2.5 MPa
2 Density 954 kg/m3
3 Indicator melting g / min 0.5
4 The coefficient of linear thermal expansion mm / m • 0.13 degrees C
5 Limit the tensile (breaking) 23 N/mm2
6 The change in length after heating,%, not more than 3 to GOST 27078 and GOST 18599-2001 p.8.5
7 Elongation at break,%, at least 250 people and 11,262 p.8.4 GOST 18599-2001
8 Hardness Shore D 59
9 Temperature Vicat heat resistance, with 128
10 Resistance to constant internal pressure of 12.4 MPa at 20 ° C, h, not less than 100 GOST 24157 paragraph 8.6 GOST 18599-2001
11 Resistance to constant internal pressure (initial stress in the pipe wall) 5.0 MPa at 80 ° C, not less than 1000 hours of GOST 24157 paragraph 8.6 GOST 18599-2001
12 Hazard: GOST GOST 12.1.005 12.1.044 4
Advantages over analogues:
Compared with the traditional Ukrainian steel or cast iron pipe reinforced plastic
Pipe highly appreciated by experts design and operational organizations have advantages
in price, the cost of installation, durability, etc. Plastic reinforced pipes meet the highest
technical requirements, have good water and physical and technical characteristics, are
high strength and elasticity, resistance to corrosion and aggressive environments. Pipes do not require cathodic
protection. The plasticity of polyethylene pipe ensures integrity in shifting of the soil.
The development stage readiness:
Ready for application
Technical and economic effect:
Manufactured products meet world standards, as evidenced by customer feedback
and certificates of conformity. Compared with non-reinforced plastic pipe laying large
obtain savings by avoiding filling pipes with sand, and it is up to 15% of the pipe.
Description of the development:
() The main feature of this pipe is reinforcement: steel wire
for water pipes and steel tape for sewer pipes. The use of steel
reinforcement can significantly reduce the thickness of the pipe wall and thus increase
its throughput without increasing the outer diameter, and increase the allowable
internal and external pressure. The outer layer of manufactured pipes in black, which provides
protection from UV rays.
The inner surface of the pipe yellow allows qualitatively video diagnostics.
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Technological document's sale Creation of joint enterprise Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|