Purpose of the development: Hardness TEMPO is used for rapid measurement of the hardness of various products (steel, cast iron, non-ferrous metals, rubber and other materials) in industrial and laboratory conditions on Brinell (HB), Rockwell (HRC), Vickers (HV), Shore "D" (HSD). Hardness TEMPO also determine the tensile strength Rm (B) made ??of steel (GOST 22791-77). Hardness TEMP-2 is designed for rapid measurement of the hardness of various products (steel, cast iron, non-ferrous metals, rubber and other materials) in industrial and laboratory conditions on Brinell (HB), Rockwell (HRC), Vickers (HV), Shora "D "(HSD), and to determine the ultimate strength and yield strength, including in accordance with GOST 22761-77. All hardness TEMPO passed State tests and registered (have certificates) in the State Register of Measurement State Standard of Russia, Ukraine, Belarus and Kazakhstan. In addition, the hardness series TEMPO made ??in a number of different industries RD Russia, including the RD-approved RF Gosgortekhnadzor.

Recommended application field: Portable hardness tester TEMP operated in power (CHP power plant, nuclear power plants), machinery, metallurgy, aerospace (hardness TEMP-3 at "The World" and the current on-orbit ISS), oil and gas, installation and repair organizations, etc. Objects controlled hardness tester TEMP bearings, tubes, sheets, pots, rails, channels, angles, tubes, gears, forgings, castings, drill, screws, hammers, axes and other tools, piston rings, rollers, metal construction, tool steel and more.

Technical characteristic: Extended measurement range allows for hardness TEMP-2 under the control of the hardness of products with little or no restrictions on their thickness, weight and level of hardness: - From babbitt and solder (10 HB) to high-heat-treated steel (70 HRC and above); - Shell, pipe, sheet thickness of 2 mm and above; - Details of low-mass type of piston rings, rotating bodies, drills with a diameter of 3 mm and above, bolts, nuts, etc.; - Made of materials with low hardness - Babbitt 20 HB 10 HB aluminum and higher rubber products from 20 to 90 units, Shore, etc.

Advantages over analogues: Distinctive features of the tester TEMP-2 - Reinforced cable at the sensor for connection to the electronics; - Programmable keyboard or computer up to 32 custom scales on steel and various materials and products; - Data memory for 200 measuring results, the ability to view them in the device output to the computer through serial port, a listing in the form of a special protocol and file archiving; - Simplicity and ease of use - all the basic operations by pressing a button (the change in angle, scale, record in memory, average); - Convenient on-screen menu, well read large numbers and text, information; - LCD backlight allows you to work in a dark and negative temperatures (down to -20 ° C); - Can be used with one and the same device for multiple sensors for various purposes, including to spetsdatchik elongated nozzle, allowing to measure the hardness of the gears with module four and above in the hollows and along the involute tooth and hardness of pulleys, slots for keys, hard to reach places, such as heat-affected zones in welded cylinders the pipes; - Extended range of the measured hardness. TEMPO abbreviation stands as follows: T - hardness, E - E, M - compact, P - portable.

The development stage readiness: Introduced in production

Technical and economic effect: Only hardness TEMP-2 can accurately measure the hardness, tensile strength and yield strength of the material steel pipe of various diameters and wall thickness of 8 mm (as well as plates and shells of 2 mm and above), using a special technique developed by the manufacturer. The performance characteristics and reliability of portable hardness tester TEMP-2 is not inferior to the best foreign analogues. Hardness TEMP-2 is included in the State Register of measuring RF, comes with gos.poverkoy.

Description of the development:
()
The delivery of hardness TEMP-2: Hardness TEMP-2 (basic set) - Block E in a plastic housing, the sensor, push rod, 2 AA type batteries, software disks, passport verification procedure, cover, cable connection device with the computer COM1, initial verification of hardness TEMP-2 . On special order supplies to various configurations: Hardness TEMP-2 (basic set) in a metal case. Hardness TEMP-2 (universal set) - Block E in a plastic or metal housing, the sensor, the pusher, batteries 2 pcs., AC adapter, battery charger, USB-cable for connection to a computer, the software on the USB drive, passport verification procedure, mounting case, the primary calibration of hardness TEMP. Dynamic hardness TEMP-2 has a large number of scales, allowing to use it as a trumpet, and as a multi-durometer. Record scales for thin-walled tubes in hardness TEMP-2 is available for a fee. Hardness, tensile strength and yield strength in tension pipes with wall thickness of more than 8 mm measured hardness TEMP-2 directly without any additional procedures.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Technological document's sale
Creation of joint enterprise
Realization of finished commodity

Photo

Country Russia

For additional information turn to:
E-mail: gal@uintei.kiev.ua