Purpose of the development: Separators fat (grease traps) are designed to treat wastewater from the fat phase and a solid insoluble substances that appear in the sewage system of food production enterprises, public catering. The need to use these devices in accordance with the SNP 2.04.01-85, is that they do not interfere with the accumulation of fatty substances dissolved in the pipeline walls, which may lead to accidental failure of the sewerage system.

Recommended application field: Food processing, food service. Waste management.

Technical characteristic: Performance standards for fat separators. (DIN1986-100) 1. Water entering the separator need only contain animal fats and vegetable oils. 2. Do not allow water from the separator toilets and rainwater. 3. Do not allow the separator waste water containing mineral liquid. 4. Install the separator should be near the point of effluent discharge. Str.. Wastewater is treated in the separator should be directed to the treatment plant. 6. Grease separators should be ventilated 7. Input pipe without the pressure gradient under 2% most suitable for feeding the flow in the separator. 8. For the installation of the separator inside the building must be well-ventilated area. 9. Before the oil separators shall not be installed pumps, because, when they are used not to precipitate formed or bad besieged emulsion. In the case of non-repudiation of the use of the pumps should be used piston-type pumps.

Advantages over analogues: The advantages of using a grease trap: • Effectiveness • Fully waterproof • Simple design and installation • Proven reliability and durability • Convenience and ease of use • Wide range of constructive

The development stage readiness: Introduced in production

Description of the development:
()
Grease - this series product, manufactured in accordance with the registered "Technical Specifications (TU 29.2-32306957-002:2009" separators VODOZHIROVYH emulsion ")", "patent", as well as the general "Technical conditions TYY 25.2-32306957-001:2007" technological capacity of polypropylene ", accompanied by a sanitary certificate. The design of a grease trap, according to TU 29.2-32306957-022:2009 are made of polymeric materials, composed of compartments separated by partitions process in which there is a separation process vodozhirovyh emulsions. In the work on the principle of separation of heterogeneous systems under the action of gravity. Sewage fats gravity through the inlet enter a separator compartment separated by a partition, which serves to retard flow and increase the time of phase separation. As a result of the forces of gravity are separated from the fat mass of water. Fat accumulates on the surface of the water. Suspended particles are lowered into the tank sludge. Next, purified water through the exhaust pipe enters the sewer system. To eliminate odors and ventilation, household grease trap under the sink is desirable to connect to the system of ventilation. Depending on the installation location and local conditions grease separators are manufactured in different shapes: the box - kitchen, small craft, cylindrical - small craft, underground installation. Installation of grease traps: Grease separators (oil separator) mounted, depending on the performance, can be placed: indoors on the floor - under the sink or under the floor (if the sewer system), as well as on the street in a special recess in the concrete substrate. If necessary, grease traps, industrial (oil separator) is dug into the ground. The technology allows the production of these grease traps (if necessary) to make their assembly directly on site.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Licence's sale
Technological document's sale
Creation of joint enterprise
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua