HIGH VOLTAGE ACOUSTIC STAND - NEA-6
Purpose of the development:
Stand high-CBA acoustic-6 is used for finding the fault location of cable lines with a voltage of 6-10 kV, with the transfer resistance R> = 500 ohms acoustic method in conjunction with the receiver R-900 and an acoustic sensor.
Recommended application field:
Energy.
Technical characteristic:
Technical data:
parameter Value
Storage capacity, 3.3 uF
Maximum output voltage 20 kV
The maximum pulse energy discharge, J 660
Modes of operation:
- Manual Yes
- Auto (with adjustable pulse repetition rate of discharge) Yes
Built-in control unit
Mains voltage single-phase alternating current, 220 ± 22
Frequency, Hz 50 ± 2
Overall dimensions 1000x620x1100
Weight, kg, not more than 160
The development stage readiness:
Introduced in production
Description of the development:
() Stand high-acoustic-6 NEA configured as a mobile unit.
Terms of use:
The device is designed for use indoors or under a shed in the following conditions:
parameter Value
Ambient Temperature, ° C -10 to 40
Relative humidity,%, not more than 80 at +20 ° C
Barometric pressure, kPa (mm Hg. Cent.) 84.0 - 106.7 (630 - 800)
The wait staff person at least 2
Allowed power from private generator power output of at least 2.0 kW.
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Licence's sale Technological document's sale Creation of joint enterprise Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|