HIGH VOLTAGE STATIONARY STAND SVS-50TS
Purpose of the development:
Stand stationary high-SVS-50TS is designed for Acceptance and operation of electrical test remedies used in electrical installations. Testing process is fully automated.
Recommended application field:
Energy.
Technical characteristic:
Specifications. General parameters of the stand SVS-50TS:
Parameter Value
Mains voltage single-phase alternating current, 220 ± 22
Frequency, Hz 50 ± 2
The above voltage measurement error in the range of 20 to 100 V,% ± 3
The above voltage measurement error in the range of 1 to 6.5 kV,% ± 3
The above voltage measurement error in the range of 6.5 to 15 kV,% ± 3
The above measurement error voltage from 10 kV to 50,% ± 3
Reduced measurement error currents,% ± 3
Power consumption stand, kW, not more than 0.9
Average service life, years 10
The parameters of the test bath:
- Maximum voltage test baths, 15 kV
- Range of measurement of leakage currents in trial mode baths, 0,3-7,5 mA
- Seats for the test 4
- Overall dimensions of the test bath, mm 700h795h865
- Weight of the test bath, kg, not more than -
The parameters of the control unit:
- Power control unit, W, not more than 20
- Dimensions of the control unit, mm 316x187x132
- Weight of the control unit, kg, not more than -
The parameters of the high-voltage BVI-50:
- Range Leakage current mode BVI-50, 0.3-10.0 mA
- The maximum voltage of the external source of high voltage, 50 kV
- Dimensions of external high voltage source BVI-50 mm 346x280x658
- Weight of the high-voltage BVI-50, kg, not more than 35
Advantages over analogues:
The stand allows you to test:
- The rubber insulating gloves;
- Rubber insulating boat and galoshes;
- Hand tools with insulated handles (screwdriver, wire cutters, pliers, etc.).
Stand equipment can be used as test systems for the high voltage insulation AC (cables, insulators, etc.).
The development stage readiness:
Introduced in production
Description of the development:
() Scope of supply:
name Number
The control unit SVS-50TS 1
Test 1 bath
BVI-unit high-50TS with cable connection (complete) 1
Cable Network
Measuring unit 1
Cable connection to the measuring unit 1
High voltage wire to connect the bath 1
High-voltage cable for the connection of test 1
Ground Wire 3
Contact circuit for connecting the tool 4
Holders bot 4
The hose connecting bath, 10m 1
Hose connector with stop
1 threaded nipple
Integrated Adapter 1
Documentation - User Manual 1
Metrological certification of GP "Kharkivstandartmetrologiya" Optional
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Licence's sale Technological document's sale Creation of joint enterprise Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|