Purpose of the development: The unit test AI-2500 is designed for testing the insulation of electrical equipment and materials alternating sinusoidal voltage with frequency of 50 Hz, adjustable in the range 0-2500 V.

Recommended application field: Application range - Electrical and Power Engineering.

Technical characteristic: Technical data of AI-2500: Parameter Value The limits of output voltage, V 0-2500 Relative error, and measurement of the output voltage,%, not more than 3 The maximum output current is 500 mA Measurement limits the output current 1p, 10-500 mA The relative error of measurement of current,%, not more than 3 Threshold current protection 1.1 Power consumption, VA, not more than 1400 Overall dimensions, mm 480x350x200 Weight, kg, not more than 25 Time of continuous operation at maximum power, hour 2 The average life of the product, 6 years Kompleknost AI-2500: Name Number, pcs. 1. The unit test AI-2500 1 2. 1 cable network 3. Connecting a high-voltage wire, 2 m 2 4. Instruction manual. AI-2500/01.00.00RE 1 5. Metrological Certificate SE "Kharkivstandartmetrologiya» 1 6. Parts - Insert fuse PM-20-10 A 2

Advantages over analogues: Due to the increased output current of the device can be used to test AC voltage winding insulation of large electrical machines. Can be successfully used for testing tool. Installing operated by one operator with the right job for installations with voltages above 1000V.

The development stage readiness: Introduced in production

Description of the development:
()
The device is designed for use indoors or under a shed at working temperatures from 5 ° C to 40 ° C, 80% relative humidity at a temperature of 20 ° C and atmospheric pressure of 84.0 - 106.7 kPa (630 - 800 mm. mercury. cent.). Power supply - single-phase sinusoidal AC voltage of 220 ± 20, 50 ± 1 Hz. AI-2500 Description: The unit AI-2500 is powered by an AC 220 V, 50 Hz and includes: - When the power source of high-voltage alternating current. - Built-in digital devices: voltmeter, stopwatch, milliamp. The unit AI-2500 provides: - Issuance of a single-phase voltage controlled 100:2500 in commercial frequency. Setting the delay time with an alarm at the end of the account in tech. which is present at the output of the device voltage at intervals of 0.5, 1, 1.5, 2, 2.5 and 3 min. - Measure the voltage outputted by the test object, with a limit of measurement of 2500 V. - Measurement of the leakage current at high voltage test with measurement range of 10, 50, 500 mA. - Fixing on indicators of voltage, leakage current, high voltage supply time and time before breakdown. The design of the AI-2500: 2500 The device is made of AI in an easy to carry unit. Working field device located on the front panel consists of three functional areas: power, information and networking. - Power Zone. This zone is the output AC voltage V. Output 100:2500 formed as two high nests protected lid to the closed position sensor. The output voltage is regulated by the handle LATR. Submission of high voltage to the test object is Start, stop - stop button. The zero position of the handle and the lid is closed LATR indicator light displays Ready. The presence of high voltage to the high voltage indicator light is displayed nests high voltage. - The Information Area. In this zone are the switches that set the test mode, the indicators that show the measured values: current, voltage, time. Information Area is divided into two parts: "leakage current" and "voltage / Timer". In the "Leakage" is an indicator of leakage current, the switch "Leakage". Minutes switch timer set time intervals of 0.5, 1, 1.5, 2, 2.5 and 3 min. - Network area. This zone is located nest to connect the power cord and the power switch "ON / OFF" button and circuit breaker.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Licence's sale
Technological document's sale
Creation of joint enterprise
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua