HARVESTER EXCAVATING PCB - 33
Purpose of the development:
Designed for mechanized cutting and loading of the rock mass.
Recommended application field:
Scope - mining and mining.
Technical characteristic:
TECHNICAL SPECIFICATIONS:
- Technical cutting performance - 0.3 - 1.8 cubic meters. / Min
- Boom swing - not less than:
width - 7000 mm
height (from soil level) - 5000 mm
below ground level - 200 mm
- Speed ??- not less than:
Working -1.0 m / min
shunting (without loading) -5.0 m / min
- The size of the harvester in the transport position:
the width of the tracks - 2610 mm
Runner width - 3700 mm
the height of the housing combine - 2000 mm
length - 10500 (13200) mm
- Weight of the combine - not more than 45 tonnes
- Nominal motor power of the executive body -
110 kW
- The total rated power of electric motors (without
loader - no more than 210 kW
- Rated mains supply:
Voltage - 660
frequency - 50Hz
(In parentheses are the parameters for the version with a scraper conveyor
with lifting and turning the console handling).
Advantages over analogues:
Benefits - Management combine done remotely wearable remote.
The development stage readiness:
Introduced in production
Description of the development:
() Combine PCB - 33 used in the horizontal and inclined up to +/- 12 degrees. generating cross-section of 10 square meters. Clear up
33 square meters. in the sinking of coal and a mixed slaughter with a tensile strength of destructible rocks up to 100 MPa (f = 8) and the abrasiveness to 15 mg
in the mines, hazardous gas (methane) and coal dust. The content of the rocks with a yield strength of 100 MPa uniaxial compression
should not exceed 30% of the total slaughter at prisechke rocks no more than 85%.
corresponds technical description
Conforms to technical characteristic
Possibility of transfer abroad:
Licence's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|