LABORATORY FOR TESTS OF STRUCTURAL MATERIALS IN ENVIRONMENTS CONTAINING HYDROGEN SULPHIDE AND CARBON DIOXIDE
Purpose of the development:
Laboratory intended for corrosion, corrosion, mechanical, electrical and other tests of structural materials in aqueous media and hydrocarbon containing hydrogen sulfide and carbon dioxide.
Recommended application field:
Chemical and oil and gas industries.
Advantages over analogues:
Advantages:
- The tests are performed in a specially equipped complex in compliance with all safety standards;
- The tests are carried out in conditions as close as possible to the real conditions of pipelines, provides
accuracy of the results;
- Extensive experience of work and cooperation with many oil and gas producing companies.
The development stage readiness:
Ready for application
Description of the development:
() Features:
- Determination of the resistance of pipe steels to hydrogen-induced cracking;
- Evaluation of the sensitivity of metals and welds to hydrogen sulfide stress corrosion cracking;
- Assessment of the surface blisters steels in environments with hydrogen sulfide;
- Definition of the threshold stress intensity factor Kissc;
- Determination of the resistance of the metal to crack propagation under the influence of cyclic loading;
- Identification of the corrosiveness of crude oil, natural gas and produced water containing hydrogen sulfide;
- Assessment of the impact on the general corrosion inhibitors, hydrogen induced cracking, hydrogen sulfide corrosion
cracking under stress and crack resistance of construction materials;
- Conduct incoming quality control of metallic materials pipes, welded
compounds tubing and casing pipes, etc. for oil and gas deposits;
- Develop material specifications of oil and gas equipment and methods of protection against corrosion.
Equipment and methods used by the laboratory:
- Gravimetric and electrochemical methods for studying the rate of corrosion of metals;
- Methods of study of the electrochemical properties of metals in environments containing hydrogen sulfide and definitions
hydrogen permeability;
- Equipment for the study of hydrogen sulfide stress corrosion cracking;
- Installations for the study of metals with low strain rate;
- Equipment for determining the intensity factor;
- Test the machine to study the corrosion fatigue of structural materials;
- The test setup for studying the crack growth rate under cyclic loads in environments
containing hydrogen sulphide.
corresponds technical description
Ready for implementation
Possibility of transfer abroad:
Licence's sale Technological document's sale
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|