Purpose of the development: Designed for respiratory protection from the effects of inhalation of vapors hazardous and harmful organic substances (gasoline, kerosene, carbon disulfide, alcohols, benzene and its homologues), pesticides, as well as particles of different aerodisperse industrial origin (dust, mist, smoke).

Recommended application field: Scope - agriculture and forestry in processing plants with pesticides, harmful industrial production.

The development stage readiness: Introduced in production

Description of the development:
()
Raspirator consists of filtering half-mask, pipe, shield, petal valve output, headband, rings, connecting rod, gas filters, screws, spacers, pressure plate and shutter. The package includes a respirator, 3 gas filters and 20 respirators. Before handling the respirator worn with clean hands, so that Half-covered chin bottom, fixed on the face using a headband elastic band, one of which must be pass through the back of the head, and the second - on the parietal. With rings adjust the length of the headband so that the respirator has been tight, but without excessive pressure is pressed against the face. The tightness of fit in the nose is achieved by pressure plates. Use a respirator: - At an oxygen content in the working area of ??less than 18% by volume; - If you do not know the nature and concentration of harmful substances in the air of the working area; - When working in enclosed or unventilated areas, tanks, silos, wells, furnaces, boilers; - When a mechanical failure; - At a concentration of harmful substances more than 10 MPC; - At a temperature below minus 30 degrees. With the above plus 50 degrees. C and a relative humidity more than 80%.

corresponds technical description
Conforms to technical characteristic

Possibility of transfer abroad:
Licence's sale
Realization of finished commodity

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua