Purpose of the development: PDS plasma sterilization system 100 is designed for cold sterilization of medical instruments containing temperature-sensitive components . These tools can take place , which is difficult to diffusion , namely , the inner surface of the slit or a long narrow tube. Using plasma sterilizer PDS 100 not only provide a solution to environmental problems , but also lead to a significant increase in economic efficiency by reducing the duration of the sterilization cycle sterilization. Plasma sterilization technology approved by the Ministry of Health of Ukraine .

Recommended application field: Medicine.

Technical characteristic: Main technical characteristics: Overall dimensions 810 x 620 x 1510 mm Camera depth: 650 mm, diameter 450 mm Material stainless steel chamber 12X18H10T Weight 275 kg Operating conditions T = 10 - 43 ° C; relative humidity: 80 % atmospheric pressure: 600-800 Top Average power consumption - 500 Watts Peak - 1100 W Management system ( fully automatic ) embedded microcontroller based processor 80c31, sound alarm Maximum temperature of products to be sterilized 60 ° C Turnaround times ( from downloading to discharge ) 15-45 min. Time for complete sterilization of the exposed surfaces of packaged items : 5 min . ; product with the blind holes of diameter 3 mm and length of 650 mm for 30 minutes.

Advantages over analogues: advantages: Proved experimentally that this plasma sterilizer exhibits high efficiency sterilization of up to 100% compared with conventional sterilizers (12/88 for ethylene oxide) as well as with other types of plasma sterilizers (Sterrad 100, Advanced Sterilization Products; Plazlyte Sterilization System, model ABT 1.0 , Abtox Inc.).

The development stage readiness: Ready for application

Description of the development:
()
Job plasma sterilizer is based on the use of a dc glow discharge , ensuring the creation of a dense plasma and visokoodnorodnoy directly in the space , in which there are products that are sterilized . This discharge plasma is more efficient for the rapid sterilization of medical instruments , especially products with long passages or holes. The sterilization process comprises repeated cycles of treatment consists of two stages - the "steam " and " plasma ." During the first phase, the chemical vapor is injected into the pre- evacuated sterilizer chamber . A special system of injection and evaporation provided a very effective steam penetration into difficult places and packages of processed products . After the " vapor " phase again evacuated chamber and ignited a dc glow discharge . Medium which is used for plasma generation , a mixture of the vapor of hydrogen peroxide and water, and molecular oxygen generated by the decomposition of hydrogen peroxide.

corresponds technical description
Ready for implementation

Possibility of transfer abroad:
Licence's sale
Technological document's sale
Creation of joint enterprise

Photo

Country Ukraine

For additional information turn to:
E-mail: gal@uintei.kiev.ua